[fishballer06]

ShockerRepair.com

DO NOT OFFER ME TRADES
Please follow us on Facebook for current markers and products available!

Yes, this thread is dated, but I'm still in the Shocker game and keeping these old girls running. At this point, this post is more of an advertisement rather than a reflection of my current inventory. Your best bet if there's something you need or want, pm me or email me at [email protected] & I will let you know if I have it. Paypal payments are preferred. Please, don't offer your trades.


Bolt Parts:


First Row - Unbored Bolts
Stock bolt - $10
Delrin bolt - SOLD
HE bolt - $15
Dynasty HE Pillow Face bolt (extremely rare) - SOLD
NDZ Stinger bolts - $20
-I can QEV mod any bolt for $3 extra each


Second Row - Partially Bored Bolts and Springs
Stock bolt - $12
HE bolt - $16
Rhino Spring - $10 each
TechT Spring - $10 each
-I can QEV mod any bolt for $3 extra each


Third Row - Bored Bolts
Stock spring modded bolt - $15
HE spring modded bolt - $20
NDZ Spring modded bolt - $25
NOX Kilo spring modded bolt - $55
Lurker Eigenbolt Aluminum spring modded bolt with QEV - $60
- I can QEV mod any bolt for $3 extra each


Fourth Row - Luxe Bolts
Stock Luxe 1.0 guide - $15
Stock Luxe 1.0 firing can - $15
Stock Luxe 2.0 firing can - $35
Stock Luxe 1.0 bolt - $20
Stock Luxe 2.0 Powercore - $99



Bolt Guides:
Stock non-HE bolt guide - $25
Stock HE bolt guide - $15
Bloodline Pear toolless guide - SOLD




First Row - Firing Cans
Stock firing can - $12
Stock HE firing can - $15
- I can high flow modify any stock firing can for $3 extra

Second Row - Bolt Sleeves
Stock bolt sleeve - $15
Delrin bolt sleeve - $20
Freeflow bolt sleeve - $30
- I can high flow modify any bolt sleeve for $3 extra


Triggers:


First Row
Stock SFT trigger - $8
Dynasty SFT stock trigger - $10
Sanded Dynasty SFT stock trigger - $9
Shocktech SFT stock trigger - SOLD
NDZ SFT trigger - $15
CP NXT Trigger (modded to fit a Hybrid frame) - $12
NXT Stock Trigger (not pictured, dust black) - $15

Second Row
CP SFT trigger (3X)- $12
NDZ SFT Slik trigger - SOLD
NDZ SFT Blade trigger - $12
Critical SFT trigger with pin (2X) - $30

Third Row
Octane NXT stock trigger (dust red, very rare) - SOLD
CP SFT Trigger (2X) - $12
NDZ SFT Blade trigger (2X) - $12

Fourth Row
NDZ SFT Rip trigger (complete, unused, silver and black available) - $15
Freeflow SFT trigger (unused, 2X) - $25



ASA's and Rails:


First Row - ASA's
Check It EZ On/Off Gloss Black (new) - $15
Bob Long On/Off Gloss Black (Victory style) - SOLD
CP On/Off Gloss Black (older style, good condition) - $20
GoG Extcy On/Off Dust Black (purging, like new condition) - $25
Smart Parts On/Off Gloss Red (great condition) - SOLD
Check It Unimount On/Off (unsure of condition, some screws may be missing) - SOLD
Hybrid Push Button On/Off Gloss Black (good condition, unsure of work condition) - SOLD
Shocktech On/Off Gloss Green (good condition, requires Shocktech rail/drop) - SOLD

Second Row
CP Razor Drop Forward Gloss Black - $5
Shocktech Drop Forward Gloss Green - $5
Shocktech Mini Drop Forward Red - $10
Planet Eclipse Drop Rail Black - SOLD
Smart Parts S Rail (black, silver) - $12 each

Third Row
Hybrid Long Rails (brand new, polish clear, dust clear, polish black, dust black) - $15
Hybrid Short Rail (brand new, polish red) - $15
Bloodline Rail (brand new, blue, red) - $15


Main Body Components, Grips


Milled out SFT body (doesn't seal, too much material removed) - $10
Polished silver SFT body (not pictured, good shape, feedneck included, PM for pictures) - $20
Gloss Red SFT frame (frame only, very rough shape) - $10
Gloss Black SFT frame (frame only, good shape) - $15
Dust Red Shocktech NXT frame and trigger (not pictured, snatch grip was sanded, PM for pictures) - $40
NXT Regulator Bands (brand new) - $5 each
Gloss Blue Strange SFT reg (decent shape) - $22
SFT Reg Sleeve (no internals included) - $8
Evil Detonator reg (unsure of working condition) - SOLD
Exalt Luxe reg grip (white, cyan, black, lime, and red available) - $20
Assorted Shocker grips - PM for price
Shocker Protouch grips (new, not pictured) - $22
Luxe stock grips (smoke/red, smoke/blue, black) - $30





First Row - Brand New
CCM NXT Feedneck (silver/black) - $25
Qlock NXT/Luxe (blue/black, pewter/black) - $30
Core Ion??? (dust black) - $15


Second Row
Various Feednecks - PM me

Third Row - Vertical ASA's
NDZ 15* - SOLD
Various Stock SFT - PM me
Various Stock NXT - PM me
Shocktech SFT (new, various colors) - $15
Dynasty SFT V-ASA (very faded, red) - $12
Bloodline V-ASA (gloss or dust, black, new) - $12
Vertical ASA Screw - $3
Veritcal ASA Washer - $1



Fourth Row - Miscellaneous
NXT Regulator Adjustment End Cap - $18
NXT Regulator Rubber Bands - $3 each (not pictured, lots available)
Assorted Gauges - PM for pricing
Solenoid inserts (left long, right short) - $12 each or $20 a set


Electronics:


Luxe OLED board, screen and cable - $115
Stock Shocker and Nerve Ramping boards - $18
2009 Shocker Tournament board (new) - SOLD OUT
Virtue OLED boards - SOLD OUT

Parker Upper boards (new) - $30
Humphrey Upper boards (new, limited supply) - $30
-I can solder upper boards if needed. Email me for details or repairs.

Parker solenoids - $60 and up
Humphrey solenoids - $65 and up
Luxe Humphrey solenoids - $85
-I have new solenoids available

Luxe battery - $20
Shocker Wire Harness - $10
SFT Shocker reflective eye ribbon - SOLD OUT
NXT Shocker breakbeam eye ribbon - $26
Nerve eye ribbon - SOLD OUT
Luxe 2.0 OLED breakbeam IR infrared eye ribbon - $30
*I have Luxe ICE upper and lower eye's available as well*


Miscellaneous:




I have every screw/fitting/oring for a Shocker! PM me what you need.

Ask me about Dynamic and Complete Marker O-Ring Kits!

SFT Shocker Detents - SOLD OUT
NXT Shocker Detent Kits (very limited quantity!) - $25 per set
SFT Eye Cover - $11
SFT Blackout Frame Screws - $4
NXT Eye Covers (ask for availability) - $25
Grip screws (short or long, black or silver available) - $1.50 each/$5 for four
Complete Shocker OEM Screw Kit - $25
Complete Luxe OEM Screw Kit - $25
Luxe Parts Tin - $30
Luxe Manifold - $25
Stock Nerve Manifold - $14
Stock Shocker Manifold - $10
-Manifold Orings - $3 per manifold
-I can high flow modify any manifold for $3 extra each


Manifold screw
Solenoid spacer screw
Body set screw
VA screw and washer
SFT trigger pin
NXT trigger pin
SFT board pin
NXT threaded board pin
SFT Power button retention pin
NXT Power button retention pin
SFT frame screw
NXT frame screw
Regulator set screw
Gauge plug screw - 1/8 NPT

[fishballer06]

Lube

Gr33se (2oz. jar) - $16
Gr33se (1 oz. jar) - $11
TechT Gun Drops (2oz bottle, not pictured) - $15
Exalt Vitamin G (Squeeze tube grease, note pictured) - $16
Exalt Vitamin O (1oz bottle oil, not pictured) - $12

Barrel Stuff



Aluminum Freak Inserts - $12.50 each or $75 for all with case
Stainless Freak Inserts (limited sizes) - $20 each
Freak Insert Case Only (new style) - $35
Luxe Freak Barrel Tip (14") - $40
Deadlywinds 14" Carbon Fiber Freak Tip - $53
Luxe Style Freak Back (dust black and gloss black) - $55
Smart Parts threaded Freak Back (new style, dust black) - PM for pricing

[fishballer06]

PM me if you're looking for Nerve or Shocker RSX parts

[kool_aid22]

of course you put up the new thread on payday

will be in touch!!!

[RoCkStAr nrg66]

PMed!!

[vinnydeez]

Any dynasty emblems laying around?

[pbplayer22]

can you pm me if you have any nxt eye covers, detents, and nxt eye ribbons? also do you take trades? i have a ccm no rise feedneck i need to get rid of.

[HLG Apocalyptic]

Could I get more info on the modded AL Eigen and a Virtue board?

[brainvictim]

PM Regarding Evil Detonator.

[pbkyle1991]

posting for feedback

[memoon]

PM'ing

[Lurch_man]

could you piece together the hybrid on/off a rail for it, and the SP freak back (assuming it fits nxt/ion threads) for $30?

[inmylife2415]

how much for the ndz vasa? also do you have a high rise q lock by chance?

[Thrilliam]

Need some parts.
Thanks
W

[prem205]

PMd you about cam drive

[Jaccen]

I'm looking for SFT eye covers for a break beamed milled body. PM me if you have something to help me out.

Cheers.

[DaytonLax14]

how much are your sft o ring kits? pm me please

[heavy68]

I didn't see a price for the qlock feednecks. please let me know Thanks!

[ZooLoo_Banditz]

pming for some parts

[Goofball1205]

Posting for feedback

[TeamSR]

Looking for SFT eyes, upper and lower board and i think thats it. If you could PM me what you have that would be great. Thanks!