[dr.strangelove]

Thanks to gchette, added an edited version of the Virtue A4-G7 manual with vertical orientation for viewing on electronic devices. Thanks Gil!

[dr.strangelove]

Thanks to a member of the Angel Owners OG Facebook group, we now have the manual for the Angel Force enhanced firing modes featured on the AF3.x and AF4.x software included with the Force Fly.

[BigAlPoulos]

Doc if it's okay with you these will all be on AngelPaintballSports.com

[dr.strangelove]

Absolutely, feel free to use anything and everything.

[wetworx101]

So, ah... anyone have the Master Tech Angel Force A4 software? Mine is still v3.3... want 4.?

[ImpnAintEasy]

Thank you so much for all this amazing info Doc. I have an old LCD I purchased in 02 from a pro player and was my first electro marker and wanted to get her ripping again. I was curious if there was a list of all the prints and seals in the LCD so I could rebuild the gun from the ground up. Also was curious what size the screws are for the site rail as mine was stripped and had to tap it to get it out. Thank you for all your help! 🙏

[ImpnAintEasy]

*o-rings and seals

[dr.strangelove]

Originally Posted by ImpnAintEasy

Thank you so much for all this amazing info Doc. I have an old LCD I purchased in 02 from a pro player and was my first electro marker and wanted to get her ripping again. I was curious if there was a list of all the prints and seals in the LCD so I could rebuild the gun from the ground up. Also was curious what size the screws are for the site rail as mine was stripped and had to tap it to get it out. Thank you for all your help! 🙏

Sorry about the late reply, but you can find an o-ring chart for the LCD here. The LCD solenoid cover/sight rail screws are M2.5 x 16mm. You can find a diagram with most screw sizes on page 33 of the LCD manual, which you can download here.

[dr.strangelove]

Added model files for 3D printed COPS/Sensi replacement sensor housing. Thanks to ragingchikn! Please see this thread for full instructions.