Rhino Spring Mod

cyberpyr8 · 03-12-2020, 07:50 AM

I am looking for a Rhino spring mod kit. Does he sell them anymore and if so, where? I found his youtube video and it said it was here somewhere but I haven't found it. Any help would be appreciated.

cyberpyr8 · 03-17-2020, 02:40 PM

Anyone have one? Still looking....

Angel_Owner_188200 · 03-20-2020, 09:50 AM

Quote:

Originally Posted by cyberpyr8

Anyone have one? Still looking....

We made a limited run and last time i checked we were both out of stock on them...

cyberpyr8 · 03-20-2020, 10:02 AM

If there are any more made I'm in.

Angel_Owner_188200 · 03-20-2020, 10:07 AM

Quote:

Originally Posted by cyberpyr8

If there are any more made I'm in.

ill talk to Ryan but last time i talked to him i think he was leaving it up to the Reflex engine

cyberpyr8 · 03-20-2020, 10:36 AM

Appreciate it.

Angel_Owner_188200 · 03-20-2020, 11:28 AM

Quote:

Originally Posted by cyberpyr8

Appreciate it.

looking at your Sig. do you have access to a 3d printer?

cyberpyr8 · 03-20-2020, 11:30 AM

Unfortunately, I don't

Angel_Owner_188200 · 03-20-2020, 11:46 AM

ok - ryan said NO DICE - his machinist is still swapped but ill see what we can do

oxia · 03-04-2022, 03:51 AM

Quote:

Originally Posted by Angel_Owner_188200

looking at your Sig. do you have access to a 3d printer?

I do, so if you have the stl of gcode file please send

Shockwave · 07-19-2022, 01:38 PM

Quote:

Originally Posted by oxia

I do, so if you have the stl of gcode file please send

I have a spring mod here that I can take detailed measurements of. Do you know how to model?

cyberpyr8 · 07-19-2022, 02:12 PM

I appreciate it but I have bought and sold (and bought again) an Insight with a Rhino mod. I don't need this any longer.

rkjunior · 09-16-2022, 11:56 AM

Digging this one up. Just bought a used insight and would love to track down the mod for it. I see Pooty sells the springs but would need the delrin piece

Drewba13 · 01-15-2024, 09:37 PM

Bump. Also looking for anyone selling a spring mod. I don't want to spend $325 on the Hindsight engine

cyberpyr8 · 01-16-2024, 07:50 AM

Having owned a few Insights with and without the rhino mod, I don't know if it's really a big help. I had more trouble with 2 of my Insights that had the mod than the stock ones that didn't. Out of the 3 I have owned with the mod, only 1 of them seemed to help.

I was looking at the Hindsight too. I don't own an Insight at the moment but was considering picking one up and trying the Hindsight. Unfortunately, the Insight I was looking at buying was sold. I love the Insight look and feel but I'm torn on whether or not to get one and try the Hindsight. It's an expensive test to see if it helps or not.

Drewba13 · 01-19-2024, 03:27 PM

Quote:

Originally Posted by cyberpyr8

I don't own an Insight at the moment but was considering picking one up and trying the Hindsight. Unfortunately, the Insight I was looking at buying was sold. I love the Insight look and feel but I'm torn on whether or not to get one and try the Hindsight. It's an expensive test to see if it helps or not.

FYI I heard back from Rhino that he's completely out of stock. Here is the response I got from Blast Legacy/Dirtyworks asking about the staggering price tag on the Hindsight:

Quote:

Our products are made here in Oregon. We did not make the Reflex and some companies make products in other areas. So our goal is to provide the best product possible. This product is also very different then the reflex and extremely expensive to make. The currently price is actually the cheap price. We should have listed it for 389.99. But it is currently listed as the cheapest price.

If I end up buying one I'll try to follow up with you.

martix_agent · 02-15-2024, 06:40 AM

I was under the impression that field 1 was manufacurting these new engines, and that dirty works was purchasing/reselling them. If this is happening in Oregon, that can't be true.

imped4now · 02-19-2024, 02:19 PM

Quote:

Originally Posted by martix_agent

I was under the impression that field 1 was manufacurting these new engines, and that dirty works was purchasing/reselling them. If this is happening in Oregon, that can't be true.

A logical assumption. I also assumed that at least some of the components were being sold, such as the bolt and volume chamber. But remember, F1 doesn't machine in-house. They use a machine shop (or more than one). I suspect BL is using the same shop. I tried to ask Richard about these things and he was annoyingly difficult and vague to talk to. His attitude completely turned me off from buying a Hindsight.

martix_agent · 02-19-2024, 03:53 PM

You're right. I forgot that Blast wasn't doing maching in-house.

I suppose the only way to find out now is to ask field one if they have things machined in Oregon.