Find fields & stores near you!
Find fields and stores
Zipcode
PbNation News
PbNation News
Community Focus
Community Focus

Reply
 
Thread Tools
Old 10-01-2020, 04:03 PM #1156
Udfxrookie
 
 
Udfxrookie's Avatar
 
Join Date: Jun 2019
Location: Florida
Brand new SL2 with Pro V2 regulator, I removed shims to make Low pressure and now it leaks from the little vent hole on the backside of the gauge.... how do I fix this
Udfxrookie is offline   Reply With Quote
Old Sponsored Links Remove Advertisement
Advertisement
Old 10-01-2020, 06:11 PM #1157
Paul77
Can't find my old account
 
Paul77's Avatar
 
Join Date: Sep 2016
Location: Canada
Annual Supporting Member
Paul77 supports DLX Technology
the whole on the back of the gauge is a atmosphere side so it cant build pressure up inside.

Id personally question the location of the leak. if it is the hole in the gauge, the gauge is bad. spray it with soapy water or dunk it in the sink to confirm the leaks location. if its the gauge id guess its the teflon tape on the stem thats leaking.

jon you there?
__________________


Powered By Powerhouse Regulators, DLX Luxe X, Pro-Shar Paintballs, Prairie Storm Paintball

All my weird random paintball parts for sale on eBay feel free to PM me offers on here.


Paul77 is offline   Reply With Quote
Old 10-01-2020, 06:21 PM #1158
Udfxrookie
 
 
Udfxrookie's Avatar
 
Join Date: Jun 2019
Location: Florida
It's not the gauge, glass, screw portion of the gauge stem but literally the vent valve (hole) on the back of the gauge. I've seen a few postings stating this is generally due to the valve stem seal (o-ring) or a piston o-ring vs the gauge being bad in a 1 month old tank
Udfxrookie is offline   Reply With Quote
Old 10-02-2020, 09:04 AM #1159
Jon @ NinjaPaintball
 
 
Join Date: Aug 2020
Quote:
Originally Posted by Udfxrookie View Post
It's not the gauge, glass, screw portion of the gauge stem but literally the vent valve (hole) on the back of the gauge. I've seen a few postings stating this is generally due to the valve stem seal (o-ring) or a piston o-ring vs the gauge being bad in a 1 month old tank
Sounds like the gauge went bad on you. It may just be coincidence with the timing.

Shoot me an email at [email protected] need to grab the date code to the lower left of the fill nipple.

Unfortunately the gauges are one thing that we do have to import since there isn't a domestic manufacturer left that produces what we need.
Jon @ NinjaPaintball is offline   Reply With Quote
Old 10-02-2020, 09:05 AM #1160
Jon @ NinjaPaintball
 
 
Join Date: Aug 2020
Quote:
Originally Posted by Paul77 View Post
the whole on the back of the gauge is a atmosphere side so it cant build pressure up inside.

Id personally question the location of the leak. if it is the hole in the gauge, the gauge is bad. spray it with soapy water or dunk it in the sink to confirm the leaks location. if its the gauge id guess its the teflon tape on the stem thats leaking.

jon you there?
Still here! My notification emails kept getting caught in the spam filter!
Jon @ NinjaPaintball is offline   Reply With Quote
Old 10-02-2020, 11:56 AM #1161
Udfxrookie
 
 
Udfxrookie's Avatar
 
Join Date: Jun 2019
Location: Florida
Just emailed you =)
Udfxrookie is offline   Reply With Quote
Old 01-16-2021, 10:24 PM #1162
CSULA21
 
 
CSULA21's Avatar
 
Join Date: Dec 2018
Location: Los Angeles
I have an HK Aerolite2 that I'm wondering if there is a way to lower the pressure to under 400 PSI? I know it's not technically a Ninja Reg, but since was a collab, just figured someone in here would know.

TIA
__________________
There's plenty of time to rest in death!
CSULA21 is offline   Reply With Quote
Old 01-16-2021, 10:59 PM #1163
Paul77
Can't find my old account
 
Paul77's Avatar
 
Join Date: Sep 2016
Location: Canada
Annual Supporting Member
Paul77 supports DLX Technology
it is a ninja reg, its just a pro v2 in a PH looking body.

why do you want a sub 450 output?
__________________


Powered By Powerhouse Regulators, DLX Luxe X, Pro-Shar Paintballs, Prairie Storm Paintball

All my weird random paintball parts for sale on eBay feel free to PM me offers on here.


Paul77 is offline   Reply With Quote
Old 02-25-2021, 01:17 AM #1164
BrickFighter8
 
 
Join Date: Oct 2020
Hello I am having what I think I have narrowed down to a Tank Regulator Recharge Issue that I am out of ideas on how to fix.

Tank is a Ninja 68ci/4500 with standard reg. Issue is velocity dropoff and failing to cycle the marker after multiple shots. If I wait several seconds, it seems the system will recharge and I can maybe get a single shot off. I've had the same issue manifest itself with a Mini, Rize, and Gtek 160R. It seems to work OK in the morning and gets progressively worse as the day goes on. When I switch to a friend's tank, the issues went away with no other changes so I suspect it's an issue on the tank side. Issue has occured with tank pressures well over 3000 psi.

Here's what I have tried:
- Cleaned out and lightly lubed the reg per directions.
- There were two red shims that I left in place.
- Replaced the regulator piston and O-rings
- Replaced the ball valve, valve spring, and O-ring (it was a little rusted)

The issue has persisted despite rebuilding the entire reg except for the mainspring. Any ideas on how to resolve this issue would be greatly appreciated, thanks!

Last edited by BrickFighter8 : 02-25-2021 at 01:27 AM.
BrickFighter8 is offline   Reply With Quote
Old 02-26-2021, 07:08 PM #1165
Paul77
Can't find my old account
 
Paul77's Avatar
 
Join Date: Sep 2016
Location: Canada
Annual Supporting Member
Paul77 supports DLX Technology
Quote:
Originally Posted by BrickFighter8 View Post
Hello I am having what I think I have narrowed down to a Tank Regulator Recharge Issue that I am out of ideas on how to fix.

Tank is a Ninja 68ci/4500 with standard reg. Issue is velocity dropoff and failing to cycle the marker after multiple shots. If I wait several seconds, it seems the system will recharge and I can maybe get a single shot off. I've had the same issue manifest itself with a Mini, Rize, and Gtek 160R. It seems to work OK in the morning and gets progressively worse as the day goes on. When I switch to a friend's tank, the issues went away with no other changes so I suspect it's an issue on the tank side. Issue has occured with tank pressures well over 3000 psi.

Here's what I have tried:
- Cleaned out and lightly lubed the reg per directions.
- There were two red shims that I left in place.
- Replaced the regulator piston and O-rings
- Replaced the ball valve, valve spring, and O-ring (it was a little rusted)

The issue has persisted despite rebuilding the entire reg except for the mainspring. Any ideas on how to resolve this issue would be greatly appreciated, thanks!

your reg is cursed, hire a spiritual advisor.



look very closely with a flashlight at the reg seat cone inside the reg body and see if you can notice any nicks or deformities.

for what its worth, its almost cheaper to just order a new standard reg than put anymore time or money into this one. and keep your old one for parts. plus youll get the new high flow pin valve which is superior in every way to the ball valve.
__________________


Powered By Powerhouse Regulators, DLX Luxe X, Pro-Shar Paintballs, Prairie Storm Paintball

All my weird random paintball parts for sale on eBay feel free to PM me offers on here.


Paul77 is offline   Reply With Quote
Old 02-28-2021, 10:25 AM #1166
BrickFighter8
 
 
Join Date: Oct 2020
Thanks, I appreciate the response. I am thinking it has to be some sort of tolerance issue within the regulator itself causing the shoot down. Sounds like a new reg might be in my future...
BrickFighter8 is offline   Reply With Quote
Old 05-25-2021, 08:37 PM #1167
ekkthree
Covid - free
 
ekkthree's Avatar
 
Join Date: Feb 2015
Location: Dirty Air
ekkthree owns a Planet Eclipse Geo
ekkthree owns a Planet Eclipse - Emek
ekkthree plays in the APPA D5 division
ekkthree has achieved Level 3 in PbNation Pursuit
ekkthree supports Ninja Paintball
Mixing around regs from tanks of different vintage and took a family photo of the different pro regs.

Didn't realize the prov2 went back to pins until I bought mine.
Left to right: Pro, ProV2 ball, ProV2 pin
Attached Images
File Type: jpg 20210525_175828.jpg (891.3 KB, 8 views)
__________________
SELLING/TRADING:

GoPro full set up
https://www.pbnation.com/showthread....5#post99979775
ekkthree is offline   Reply With Quote
Old 06-04-2021, 06:14 AM #1168
Mr. Charlie
 
 
Mr. Charlie's Avatar
 
Join Date: Jun 2018
Location: FL
Mr. Charlie owns a Planet Eclipse - Emek
Mr. Charlie owns a Planet Eclipse - Emek
They went back to the Pin Valve because the Ball Valves were causing problems with some ASAs.
__________________
Lava DSR+, Dynasty Scales CS1, M3s+, PAL EMEK, and M2 all with Ninja SL2 77/4500 tanks with PowerHouse Haymaker Gen. III tank Regulators! Spyder Sonix with Empire Pure Energy 48/3000.
Mr. Charlie is offline   Reply With Quote
Old 06-24-2021, 03:43 PM #1169
Monkey D
 
 
Monkey D's Avatar
 
Join Date: Jun 2021
There’s a small leak from the fill nipple from time to time on my ninja and I bought it like 3 weeks ago, is that normal or is it faulty?
Monkey D is offline   Reply With Quote
Old 06-25-2021, 12:29 AM #1170
Paul77
Can't find my old account
 
Paul77's Avatar
 
Join Date: Sep 2016
Location: Canada
Annual Supporting Member
Paul77 supports DLX Technology
Quote:
Originally Posted by Monkey D View Post
There’s a small leak from the fill nipple from time to time on my ninja and I bought it like 3 weeks ago, is that normal or is it faulty?
Your just lucky, is it leaking from the reg body to fill nipple or is the inside pin leaking?

If you want take it back to the shop you got it from, or send it back to ninja, or fix it yourself.

Go buy a lotto ticket.
__________________


Powered By Powerhouse Regulators, DLX Luxe X, Pro-Shar Paintballs, Prairie Storm Paintball

All my weird random paintball parts for sale on eBay feel free to PM me offers on here.


Paul77 is offline   Reply With Quote
Old 06-25-2021, 06:37 AM #1171
Help @ Ninja PB
 
 
Help @ Ninja PB's Avatar
 
Join Date: Oct 2015
Location: Crystal Lake
Help @ Ninja PB supports Ninja Paintball
Monkey d - how much air are you putting in?
__________________
Ninja Paintball
Made in the USA
www.Ninjapaintball.com
www.facebook.com/ninjapaintball
Help @ Ninja PB is offline   Reply With Quote
Old 06-25-2021, 01:21 PM #1172
Monkey D
 
 
Monkey D's Avatar
 
Join Date: Jun 2021
**Ask a Ninja Tech**

Quote:
Originally Posted by Help @ Ninja PB View Post
Monkey d - how much air are you putting in?
About 3000 to 4000
Monkey D is offline   Reply With Quote
Old 06-25-2021, 01:23 PM #1173
Monkey D
 
 
Monkey D's Avatar
 
Join Date: Jun 2021
Quote:
Originally Posted by Paul77 View Post
Quote:
Originally Posted by Monkey D View Post
There’s a small leak from the fill nipple from time to time on my ninja and I bought it like 3 weeks ago, is that normal or is it faulty?
Your just lucky, is it leaking from the reg body to fill nipple or is the inside pin leaking?

If you want take it back to the shop you got it from, or send it back to ninja, or fix it yourself.

Go buy a lotto ticket.
It’s literally like inside pin but it’s a whole funny thing to try to get it
Monkey D is offline   Reply With Quote
Old 06-25-2021, 06:22 PM #1174
Paul77
Can't find my old account
 
Paul77's Avatar
 
Join Date: Sep 2016
Location: Canada
Annual Supporting Member
Paul77 supports DLX Technology
Quote:
Originally Posted by Monkey D View Post
It’s literally like inside pin but it’s a whole funny thing to try to get it
if you feel qualified, there is a small urothane oring on the pin itself if your going to change it. BUT because you just bought it the shop you got it from should do it for free.

The ninja pin will look like this
Attached Images
File Type: jpeg 27CF4357-FC0D-4D22-814D-33A4EB83CD76.jpeg (435.6 KB, 6 views)
__________________


Powered By Powerhouse Regulators, DLX Luxe X, Pro-Shar Paintballs, Prairie Storm Paintball

All my weird random paintball parts for sale on eBay feel free to PM me offers on here.



Last edited by Paul77 : 06-26-2021 at 09:50 PM.
Paul77 is offline   Reply With Quote
Old 09-11-2021, 08:12 PM #1175
Diablo Dan
 
 
Diablo Dan's Avatar
 
Join Date: Dec 2002
Location: Syracuse NY
 has been a member for 10 years
My 3000psi regulator has two orings on the big end of the piston.
The rebuild kits show one oring .
Can I install the single oring piston in my reg?

I'm guessing that the single oring piston is the "new & improved" version but just want to be sure.

Last edited by Diablo Dan : 09-11-2021 at 08:31 PM.
Diablo Dan is offline   Reply With Quote
Old 09-11-2021, 09:00 PM #1176
Help @ Ninja PB
 
 
Help @ Ninja PB's Avatar
 
Join Date: Oct 2015
Location: Crystal Lake
Help @ Ninja PB supports Ninja Paintball
Correct and you can use the single oring piston as a rebuild in your reg without issue
__________________
Ninja Paintball
Made in the USA
www.Ninjapaintball.com
www.facebook.com/ninjapaintball
Help @ Ninja PB is offline   Reply With Quote
Reply


Thread Tools

Posting Rules
Forum Jump