[cervantes530]

I have an angel that I was shot with a high pressure tank when should of been shooting with a low pressure air tank and blew up something inside. Any have any advice how to fix or what needs to be replaced?

[touchdown235]

The internal ram seal failed most likely, meaning you will need to replace the ram (or rebuild, if you have a ram machined to be rebuildable). With the breech open, is it leaking from the bolt pin slot?

Also fyi, that's a standard A1 rather than A1 Fly.

[Methodcaptain]

As mentioned above, it is likely that the HP use exceeded the pressure of the mini reg and damaged your ram.

It can also cause damage to the mini reg small piston, and the LPR/Solenoid as well.

I can take a look at it if you would like. Shoot me a PM.

A1's are my specialty

[dr.strangelove]

A more specific description of the symptoms would make it easier to narrow down if you want to try to tackle it yourself.