READ THE RULES BEFORE POSTING.
DIABLO WRATH FAQ:
-Autococker Threads
-.693 Bore Stock Barrel
-Electropneumatic Air Ram Operation (spring return) FASOR - forward air spring return
-Break Beam Eyes
-Odyssey/Dragun/Spyder Feedneck
-Built in QEV (DO NOT ADD ANOTHER ONE)
-Dual rubber detents
-VERY good stock HP regulator (+/- 4 fps AFTER broken in)
-25g Trigger Switch
-Stock ASA has non-standard dovetail mount (This means if you want to add a drop forward, you'll need to buy a drop, an on/off ASA and a macroline kit)
-Autococker Vertical ASA Compatible.
-Dragun T1/TES/Spyder valve compatible.
-
An HP tank is reccomended for the Wrath, though LP will work.
-Weighs in (without barrel) at 2lbs 11.8oz
-------Wrath Dimensions-------
Wrath height (bottom of grip frame to top of feedneck)--8 inches
Length from back of ram cap to front of barrel opening---7 7/8 inches
Length from back of ram cap to front of LPR----10 13/16 inches
Body width (measured at widest point)---15/16 inch
Grip frame width with grip on---1 3/8 inches
Grip frame width w/o grip on---3/4 inch
General Wrath Information
Wrath FAQ, upgrades, and mods.(AKA-The Spartacus sticky) Some very good info inside.
Wrath Wiki
WRATH MANUAL:
Online Wrath Manual (pdf format)
THE CARE AND FEEDING OF YOUR WRATH:
5 steps for first time Wrath users
Wrath Maintenance video--
by Diablo-Pball
General maintenance for the Wrath
JJ's Lazy man's Wrath maintenance
More Wrath Maintenance With Pics!--
by everymarkeritouchedies
How to adjust the velocity/LPR/operating pressure on your Wrath
Wrath regulators explained by The Inflicted
How to adjust your stock trigger for the shortest pull by Grivooga
Solenoid Troubleshooting Guide by blaster44
WRATH ANATOMY:
Labeled diagram of Wrath disassembled.
Diagram of Wrath regulator
Diagram of Wrath LPR disassembled
REPLACEMENT PARTS:
Replacement parts for your Wrath from NPS
Replacement parts for your Wrath
Another site for replacement parts Seems a bit schetchy so buyer beware.
Wrath LP hose info thread. Info on the size and ordering replacement LP hose.
Wrath ball detent pic compared to Timmy and PMI by The Inflicted
Mod Intimidator detents for use with Wrath by mrb2kwitpds
WRATH VERSIONS:
Difference between Wrath Gen 1 & Gen 2
Summary of the Wrath generations
MISC WRATH INFO:
Pros and cons of the Wrath.
The "So my Wrath has a battery charger port and I'd like to know more about that" thread
Can you use CO2 on the Wrath?
Delrin/Nylatron swelling and delrin vs teflon
The Wrath LTD
What makes a LTD different from a regular Wrath by muppetmower316
The Wrath LTD info thread.
The Wrath R15 ramping board (Stock board for the Wrath LTD)
How to change to ramping or full auto on the R15
Wrath Troubleshooting Threads
20 Ways to make your Diablo Wrath stop chopping by akim2006
Wrath trouble shooting guide for ball breaks and slow shooting.
Wrath t-board/ultra chip eye problem
How to get rid of shootdown by Diablo-Pball