[Califf]

Hi.
My Mini GS is leaking from the bottom of ASA, precisely from the pin that on/off lever pushes. Strange thing is that this is happening when the lever is flipped off, when i flip it on it stops and the mini shoots normal.

Besides that, gauge is not zeroed, but that's just a little inconvenience, and I'll replace it shortly (unless there's a way to zero it).

I've read the sticky, and found nothing that would solve this. Tried to clean the pin and lever, tried to lube it with a drop of oil, still leaks.

Any ideas?

[jherr]

What tank regulator are you using?

[Califf]

I used bottles with dye lt, puree energy and some no name brand regulators and it's always the same resault.

I use vanquish as my main, and all these bottles work great with it.

[jherr]

Did you remove the asa regulator on/off pin?

[Califf]

Originally Posted by jherr

Did you remove the asa regulator on/off pin?

Removed and cleand it, even lubed it - still leaks.

[Knorkator]

Did you check the orings inside? Especially the ones on the reg seal retainer.

[jherr]

is the pin in correctly? when you look into the asa, do you see a rounded pin or a flat cylinder?