[Poppets 4 Life]

I took apart my marker to have it annodized. Got it back and assembled it and I'm having issues with it.

Looking at the diagram it's missing the ( ball seat). But it didn't have that before hand. Or at least I didn't see it while disassembling it. Ooof.

What that said I watched dangerous powers YouTube channel. They disassembled it and I didn't see one in their video either.


Anyways, I get it together. And it's letting air through the regulator. I close the reg to zero it so I can back it off and adjust the pressure. The second I close it. Air stops flowing. But as I open it. No air flows. What am I doing wrong here.

[CA_Tectonics]

You need that ball bearing in there. The reg seal/pressure adjustment won't work correctly without it.

[Poppets 4 Life]

Originally Posted by CA_Tectonics

You need that ball bearing in there. The reg seal/pressure adjustment won't work correctly without it.

I have the ball bearing. In the manual that has the exploded view. There's a little plate that goes under the ball. Mine doesn't have it. Neither did the one from the official dangerous power YouTube channel though