[Southern_Baller]

I took my Epiphany I picked up from my friend to the field and couldn't get it to shoot. I aired it up and turned it on, pulled the trigger and nothing. It has fresh eyes and a fresh battery. It was running at around 280 psi. I tried adjusting the trigger and the dwell. Still nothing. Tried adjusting the pressure, and nothing. Any help is greatly appreciated. Thanks everyone.

[Southern_Baller]

anyone out there??

[esse_prometheus]

sounds like your pressure is too high, I'd suggest dropping the pressure to zero and slowly bring it back up. Battery is another one I would suggest, even if it was a fresh battery it may not be fresh enough. One more thing is cleaning, I've seen a lot of markers stop functioning because they were never cleaned, maintained, or lubed.

[Southern_Baller]

I'll try to adjust the pressure and see what happens. Also, I have cleaned & lubed it recently. I'm thinking its a solenoid problem. Thanks for the help man.

[Devlin123]

have you tried dry-firing it?

[simonbarsinistr]

Late response, and probably too late to help, but here goes....

Did you make sure that the trigger adjustment was contacting the leaf spring on the board? Ive seen that set screw back out before, or been adjusted in too much so that the leaf spring for trigger activation never cycles back out to be be triggered again. You should be able to hear that leaf spring click lightly even with no power to the gun.