[spinny2559]

Clearing out a lot of stuff. Here goes:
-All prices are OBO.
-Want more pictures? Just ask. Have any questions? Just ask.
-There are a few items for sale written below that are NOT pictured.
-Spend more than $20, and pick something with a * next to get for free.
-The more you buy, the cheaper the prices get.
-Want to buy it ALL? You will get around 50% off EVERYTHING.
-Very few items will cost more than $5 to ship via USPS Priority.


-gloss red Dye Hyper 2 regulator, missing some internal shims. $20
-5/32" hoses (Ion size) $1 for 2ft *
-1/8" hoses (Cocker size) $1 for 2ft*
-electronic cooling fan for JT masks (not pictured)- $10
-green CP Factory Team drop (with rail) $10
-green ANS ASA-$4
-32 Degrees black on/off ASA- $13
-black CP flame drop forward (with rail)- $15
-black Dye Airport, rather scratched, comes with straight macroline fitting- $5 GONE
-red SP Dovetail clamping rail- $7 -SOLD
-red CP micro drop with rail- $9 GONE
-red Tapeworm , comes with 1 foot of hose- $6
-silver drop forward with matching silver ASA and steel braided hose- $10
-black JT mask visor (not pictured)- $2 *
-smaller black drop forward with attached ASA- $10- GONE
-larger black drop forward $8
-spray painted silver ASA with steel braided hose (stripped screw stuck in ASA and attached piece) $2, with matching drop forward- $5* GONE
-large silver ASA- $5
-25 assorted pieces of macroline- $6 (free upon request for any order over $65)
-assorted steel braided hoses- offer
-black CP regulator with macroline fitting- $40 GONE
-black Tippman Proshop GTA regulator- $30
-Ion regulator with macroline fitting-$10
-polished silver regulator- $15 with macroline fitting
-polished silver LPR- $7
-black LPR, looks like Palmers Micro-Rock, comes with barb and fitting- $12
-polished silver Clippar ram, stroke around 1.25", very smooth- $10
-Co2 valve- $5
FIttings:
-PTP Pro-Flow Filter with 90 degree elbow and nipple-$5*
-90 degree female female adapter with male piece- $2* GONE
-ANS quick purge (great for remotes)- $3* GONE
-(2x) quick disconnects and 1 nipple- $5 for all
-(3x) Humphry HO4OE1 solenoids, brand new. good for pneumatic parts and solenoid repairs, operating voltage is too high for paintball boards.- $10 each


-Ion body- $5
-Ion frame- $20
-Ion bolt- $10
-Ion breach with feedneck- $30
-Ion firing can with donut- $30
-Ion Regulator- $10
-Ion grips- $5
All Ion parts- $75 (you save $35) I will also include a board/solenoid for free. Needs wire re-attached.
-Hybrid CK grips- $15 GONE
-Ego grips- $7 GONE
-clear Dye oldschool grips- $15
-random Spyder bolt with pin -$5*
-BKO ram with manifold and barbs- $10
-random Evil feedneck- $3* GONE
-random polished blue feedback- $3*
-random black feedneck- $3*
-spyder detent- $2*
-Shocker trigger- $3*
-3 other random triggers- $3 for all*
-2 battery harnesses- $1*
-pancake solenoid with harness- $4*
-random board with dip switches, and LCD screen- $4*
-Cyborg board-$15
-customized Freestyle board, tiny, great for project gun- $5*


hopper parts:
-RF chip (not pictured)- $10
-Halo Raceway with bottom piece and ball bearing piece- $8
-Shocktech Hotrod Kit aluminum Drivecone with matching aluminum drive shaft- $15
-Empire back plate with hole where on/off button is-$1 * GONE
-Custom made Happy Bunny Halo backplate, used, but looks very cool-$2 * GONE
-Halo Lid- $2*
-Halo Battery Pack- $4
-Halo harnesses (1 for eyes, 1 for motor and battery (bad motor, including new one)- $10
-Evo 2 (Egg) replacement boards- $5
-(3x) Halo boards, $10 for all, don't know if they work
-2 plastic/delrin Halo spring cups $3 for both*
-1 aluminum Halo spring cup-$5
-bag of 50 random Halo screws, springs, nuts, beads, and gears- $7
-Halo Boost Kit, comes with charger, battery, and all harnesses- $50


-Powdercoated silver to black fade 98 Custom receivers, tons of milling and mods. Drilled for centered, foregrip smoothed, site smoothed, grip opened, internal milling for internally lined LPK, quick strip cut. Great project receivers with some work. -$20
-Stripped and heavily milled 98 Custom receivers. Attempted vertical cocking mod, opened grips, polished, good for a project, not much else. $10
-Near perfect condition 98 Custom receivers, no modifications. $35. Can sell as gun too with any upgrades you see here. Everything will come installed and tuned. SOLD, UNLESS YOU WANT THE WHOLE GUN WITH UPGRADES.
E-bolt parts:
-GTA E-bolt ASA/LPR- $25 SOLD
-(2x) GTA E-bolt boards. One with solenoid, other without. Both are sold as is and you will need to soldier some wires to get them working. $5 for the one without the solenoid, $10 for the one with.
-BSI E-bolt board, comes with manual. on/off switch needs to be replaced (50 cent switch at radio shack). Sold as is because I have no way of testing, but I am nearly positive this works fine. $20. GONE
-BSI E-bolt ram- $25 GONE
-BSI E-bolt battery box (the metal one)- $10 SOLD
-GTA plastic battery box - $4
-GTA ram housing, back milled to fit QEV (still raw)- $15
-Custom tapped 2 way GTA ram with small chunk milled off for air line (not visible once installed)- $30
-custom made BSI 2-way ram, may need a new o-ring (I have the exact size)- $35 SOLD
-GTA E-Bolt rail - $5 SOLD
Other
-Maddman Spring Kit: has 3 striker springs and one sear spring, comes with instructions- $7
-Tippmann 98 Custom stock foregrip - $3
-Tippmann 98 Custom rubber foregrip- $8
-(4x) 98 Custom power tubes. 2 for R/T, 2 standard- $5 each or 2 for $8
-98 Custom Star Fire front bolt- $8 GONE
-98 Custom stock front bolt- $4
-98 Custom GTA double trigger- $10 GONE
-98 custom vertical adapter, BNIB - $15 GONE
-98 Custom polished silver rocket cock- $15
-98 Custom polished silver rear velocity adjuster- $10
-98 Custom grip sets, 1 older style, 1 random set, 1 set for E-grip- $5 each
-98 Custom end cap- $2
-98 Custom aluminum powertube and aluminum front bolt- $25 GONE
-Sure Shot red dot ACOG site- $8 GONE
-long sniper scope- $8
-Rufus Dawg double trigger stick trigger, broken in half, can be used as single trigger or for trigger parts- $3
-single trigger frame- $2
-double trigger frame with tape on it - $3
-98 Custom grips signed by some member of Tippmann Effect, can't make out the name, I can take a closer pic by request - $8
-Tippmann barrel plug- $3
-blue 14" CP .689 barrel. good condition, some minor scuffs, very very accurate- $35
-(2x) stock Tippmann barrels- $8 each
-12" Stiffi, 98 Custom threads- $40 GONE
-aftermarket GTA 12" barrel- $12 GONE
-various pieces of steel braided hose. offer
-Low Pressure Kit (LPK)- $75, $95 with Tippmann GTA reg
-Tippmann GTA regulator- $30
A-5 Parts: ALL GONE
-split grip halves for E-grip A-5- $12
-bag of A-5 pins, trigger frame, interior trigger plates- $5
-2 armature pins for E-grip- $5 each, both for $8

I accept money orders and Paypal. Try me with trades, but cash is king. Check out my old and new feedback, and buy with confidence.

[Pballer2013]

trades? mainly interested in some tippy items

[spinny2559]

Originally Posted by Pballer2013

trades? mainly interested in some tippy items

Trying not to do trades, but shoot me a PM and let me know what you want/want to trade.

[joeaun61]

10 for the hyper 2 pm me

[spinny2559]

Originally Posted by joeaun61

10 for the hyper 2 pm me

I can do $18, shipping included.

[jonotwist]

i see tons of goodies that id love to have,
one being parts to build a 98.

Ill pm ya when i find some dough though.

[spinny2559]

Originally Posted by jonotwist

i see tons of goodies that id love to have,
one being parts to build a 98.

Ill pm ya when i find some dough though.

sounds good, hopefully things will still be around

[pinowarrior]

parts for 98

[Bunker Busters]

Just bought some items and he is a great guy to work with, lets get the rest sold!!!

[dvsRaveR]

I need the whole Steel braided hose assembly for the tippmann. I currently use a remote coil and I hate it.

I need everything past the tombstone.. PM ME PLEASE!!

[Sniper1154]

How much for all the 98C parts?

[dagmar31]

pmed about a reg

[spinny2559]

PMd all.

[Bumblebeekyle123]

PM me and i will pay for all shipping and alot of those Ion parts i really need that frame

[spinny2559]

Originally Posted by Bumblebeekyle123

PM me and i will pay for all shipping and alot of those Ion parts i really need that frame

Someone is currently interested in all of them. If that falls through, I'll let you know.

[derekjudd145]

Originally Posted by spinny2559

Someone is currently interested in all of them. If that falls through, I'll let you know.

I am also intressed in the ion stuff especially the frame we might have a bidding war on that buddy.

[spinny2559]

Originally Posted by derekjudd145

I am also intressed in the ion stuff especially the frame we might have a bidding war on that buddy.

Hah, I'll keep both you guys posted on everything.

[tent15]

PM'd u about the tippmann vertical adaptor kit, ill give you 10 shipped first class(cheaper) and paypaled for it, LMK either way dude thanks

[spinny2559]

Tent- Never got a PM, but even with first class you would need to add only a few more dollars, it's brand new and the GTA ones go for $16-$20 new. I can do $15 with shipping included.

[Bumblebeekyle123]

dude i really need that frame and pretty much all the ion parts im making a hole new legit ion message me back pro

[spinny2559]

Sent out PM's.

To all the guys who have already paid for something (aside from the Dye Airport), you should be expecting your packages today.