Find fields & stores near you!
Find fields and stores
Zipcode
PbNation News
PbNation News
Community Focus
Community Focus

Reply
 
Thread Tools
Old 07-29-2020, 10:22 PM #1
rollnhvy
 
 
Join Date: Apr 2018
Yep another mini question

I have one acting weird when you first air up the marker it barely shoots. Fire a few shots and it is some what normal until you hit the chrono. Marker has been recently lubed. All seals have been replaced including poppet. Reg is adjust to 200 psi assuming the guage is accurate. Marker shoots at about 260 psi with velocity adjuster flush. The marker has a virtue board in it. Is there a recommended starting point for dwell ?
__________________
PE ETHA PE GTEK PE EGO 9 SP EPIPHANY
rollnhvy is offline   Reply With Quote
Old Sponsored Links Remove Advertisement
Advertisement
Old 07-30-2020, 02:15 AM #2
Knorkator
Mini/Axe/Autococker
 
Knorkator's Avatar
 
Join Date: Oct 2017
Location: Austria
Backcap only needs 3/4 to 1-1/4 turns out. At 200 psi you should easily get to 290 fps. I would double check the oring fitment of bolt -> bolt guide -> body -> poppet.

Keep dwell stock until it works. Then you can slightly lower it if you want...not necessary though.
Knorkator is online now   Reply With Quote
Reply


Thread Tools

Posting Rules
Forum Jump