 |
|
01-23-2021, 09:57 PM
|
#3109
|
Join Date: Nov 2004
Location: Yuma, AZ
|
Quote:
Originally Posted by Mr. Charlie
Me too. I have had the same jar for almost 2 years now and haven’t noticed any separation here in FL, I always keep the jar at home in a closed drawer though...
|
I have a big tube and it separates if I forget to shake it a bit before use. Not a huge deal. That lube + the Gamma Core has to equal near nuclear armageddon-like reliability.
|
|
|
Sponsored Links
|
Remove Advertisement
|
Advertisement
|
|
01-24-2021, 08:14 AM
|
#3110
|
John - conscious paradox
Join Date: Apr 2013
Location: Tyler, TX
|
That's crazy stealthy. I have had no separation even when keeping it in my hot garage.
__________________
"(...) the only way to speak seriously to the world today is with irony." - Umberto Eco
Back in paintball?
|
|
|
01-24-2021, 09:52 PM
|
#3111
|
Join Date: Nov 2004
Location: Yuma, AZ
|
Quote:
Originally Posted by ironyusa
That's crazy stealthy. I have had no separation even when keeping it in my hot garage.
|
I mean it's not a huge deal or anything. Shake the tube, apply the grease. Very similar to a lot of paintball greases I've used.
|
|
|
01-25-2021, 07:58 AM
|
#3112
|
Join Date: May 2012
Location: Gallifrey
|
Same thing happens to my dye grease as well. If I don't use it for like a month or two I have to shake it to mix it up before I use it. It still performs great. Just as good as any other lube I've used. That being said, I only play about once a month and shoot a case between two or three markers when I go out, so I'm certainly not a power user like most people in this thread.
__________________
Sharp as a tack, but in the sense that I'm not smart, just a prick.
|
|
|
01-25-2021, 10:25 PM
|
#3113
|
Back Center = Bad Back
Join Date: Dec 2014
Location: Washington
|
I wasn’t able to play this weekend, a huge bummer, but I got around to chatting with some insider folks. Here’s some stuff I kind of found out. Also, this thread is steadily on it’s way to break 200k views. I’m trying to do something a little special for the occasion.
Got word from a trusted source that Paintball Extravaganza will not happen in Q1. It might not happen this year too. This is unofficial, just his thoughts when I asked.
Also no new Vanquish in development... but ya never know if the Vanquish name was retired and replaced with a new name. Like the Axe and Syx. But still I take it that there is no new high end in development. I’d like my assumptions to be incorrect in this case, just saying.
DLX just may be working on a legit home run with their new Luxe. I’m unable to afford the ultimate luxury version ( Adrenaline ), but everything I’m hearing about the new release sounds very promising.
__________________
Paintball Markers supplied by: Trademygun.com and Gunfightersports.com
Home Fields:
-KC Crusaders [ woodsball and speedball]
-Operation Paintball [ woodsball and speedball ]
2021 Setups:
-Prime XTS, Powerhouse Haymkr Reg, HK 80/4500 Tank, Spire 280 Loader, and Dye UL-s barrel. [ speedball ]
-CVO w/Adrenaline Frame, Powerhouse Haymkr Reg, HK 80/4500 Tank, Dye R2 Loader, and Dye UL-s barrel. [ woodsball]
2021 Speedball Team Gun’s 4 Hire ( locals )
|
|
|
01-25-2021, 10:49 PM
|
#3114
|
Join Date: Nov 2004
Location: Yuma, AZ
|
Quote:
Originally Posted by Noa Bo
I wasn’t able to play this weekend, a huge bummer, but I got around to chatting with some insider folks. Here’s some stuff I kind of found out. Also, this thread is steadily on it’s way to break 200k views. I’m trying to do something a little special for the occasion.
Got word from a trusted source that Paintball Extravaganza will not happen in Q1. It might not happen this year too. This is unofficial, just his thoughts when I asked.
Also no new Vanquish in development... but ya never know if the Vanquish name was retired and replaced with a new name. Like the Axe and Syx. But still I take it that there is no new high end in development. I’d like my assumptions to be incorrect in this case, just saying.
DLX just may be working on a legit home run with their new Luxe. I’m unable to afford the ultimate luxury version ( Adrenaline ), but everything I’m hearing about the new release sounds very promising.
|
You could afford it, you would just need to shed some toys. 
|
|
|
01-26-2021, 08:07 AM
|
#3115
|
Legit As They Come
Join Date: Sep 2012
Location: Richmond,VA
|
Quote:
Originally Posted by Noa Bo
I wasn’t able to play this weekend, a huge bummer, but I got around to chatting with some insider folks. Here’s some stuff I kind of found out. Also, this thread is steadily on it’s way to break 200k views. I’m trying to do something a little special for the occasion.
Got word from a trusted source that Paintball Extravaganza will not happen in Q1. It might not happen this year too. This is unofficial, just his thoughts when I asked.
Also no new Vanquish in development... but ya never know if the Vanquish name was retired and replaced with a new name. Like the Axe and Syx. But still I take it that there is no new high end in development. I’d like my assumptions to be incorrect in this case, just saying.
DLX just may be working on a legit home run with their new Luxe. I’m unable to afford the ultimate luxury version ( Adrenaline ), but everything I’m hearing about the new release sounds very promising.
|
With the Bankrupys of the GI. I don't expect anything new for 12-24 months. That's usually how it goes. Then as far as DLX I believe they have a home run when they clean house on their tech support and get people who actually care and respond. but teams at a local field got a fresh shipment of amps and 3 out of 5 did not work out of the box looks like the most recent batch had bad eyes. They gotta fix these QC issues ASAP.
__________________
Youtube: https://www.youtube.com/user/XxJkatxX
160R,Trex Victory,DM7
Virtue Spire 3/FS 88/W Powerhouse Reg,
^Changes so much does not even matter XD
East Carolina Paintball Team Alumni
2015 NCPA National Champion Class AA
|
|
|
01-26-2021, 06:12 PM
|
#3116
|
Scales CS1, M2, & M3s+
Join Date: Jun 2018
Location: FL
|
Last practice I heard from someone there that he has a new prototype Solenoid Housing for the Dye M3 series Markers that apparently has inserts or some way of adjusting the airflow.
Anyone else heard of this or have one?
__________________
Gonna scare you up and shoot ya, cause Mr. Charlie told me so.
|
|
|
01-26-2021, 06:32 PM
|
#3117
|
High-end Aficionado
Join Date: May 2012
Location: ATL
|
Quote:
Originally Posted by Mr. Charlie
Last practice I heard from someone there that he has a new prototype Solenoid Housing for the Dye M3 series Markers that apparently has inserts or some way of adjusting the airflow.
Anyone else heard of this or have one?
|
That sounds like a cool idea, but you would think it would be dangerous to allow users like some speedballers who can’t even maintain their markers change inserts in a manifold.
__________________
Domination through Saturation
Old and Slow
Current Dark Side Markers:
Active: Several Markers
Active Reserve: Many, Many More
Retired from Active Service: A Few limited edition yet fully functional markers
|
|
|
01-26-2021, 06:35 PM
|
#3118
|
Join Date: May 2012
Location: Gallifrey
|
the chances of PE offering a mech only cs2 like the with the M170R is pretty low right?
__________________
Sharp as a tack, but in the sense that I'm not smart, just a prick.
|
|
|
01-26-2021, 07:05 PM
|
#3119
|
BTFU
Join Date: Apr 2003
Location: Indianapolis
|
Quote:
Originally Posted by Big Papa Pink
That sounds like a cool idea, but you would think it would be dangerous to allow users like some speedballers who can’t even maintain their markers change inserts in a manifold.
|
I too foresee a potential for reliability issues, but maybe they've designed with that in mind.
Quote:
Originally Posted by Intern1
the chances of PE offering a mech only cs2 like the with the M170R is pretty low right?
|
Very.
|
|
|
01-26-2021, 11:22 PM
|
#3120
|
Back Center = Bad Back
Join Date: Dec 2014
Location: Washington
|
Quote:
Originally Posted by Mr. Stealthy
You could afford it, you would just need to shed some toys. 
|
Haha truth.
Quote:
Originally Posted by XxJKATxX
With the Bankrupys of the GI. I don't expect anything new for 12-24 months. That's usually how it goes. Then as far as DLX I believe they have a home run when they clean house on their tech support and get people who actually care and respond. but teams at a local field got a fresh shipment of amps and 3 out of 5 did not work out of the box looks like the most recent batch had bad eyes. They gotta fix these QC issues ASAP.
|
I do have to say, Russell and Corey Field have gone above and beyond to help me. I still don’t understand the one tech who just stopped talking to me after I pointed out that my eyes ( in my X ) wouldn’t register a ball in place if I had the gun tilted down or back, like it had to be level for the eyes to read. In defense of SP and even Dye and many other manufacturers, some stuff gets passed QC and onto the customer. Field One seems like they nailed the process though, but they are also dealing with smaller batches of guns too. Planet Eclipse is numero uno in this category imho.
Quote:
Originally Posted by Mr. Charlie
Last practice I heard from someone there that he has a new prototype Solenoid Housing for the Dye M3 series Markers that apparently has inserts or some way of adjusting the airflow.
Anyone else heard of this or have one?
|
If it’s in Florida I’m guessing Billy Wing has something to do with it. I’d ask him.
__________________
Paintball Markers supplied by: Trademygun.com and Gunfightersports.com
Home Fields:
-KC Crusaders [ woodsball and speedball]
-Operation Paintball [ woodsball and speedball ]
2021 Setups:
-Prime XTS, Powerhouse Haymkr Reg, HK 80/4500 Tank, Spire 280 Loader, and Dye UL-s barrel. [ speedball ]
-CVO w/Adrenaline Frame, Powerhouse Haymkr Reg, HK 80/4500 Tank, Dye R2 Loader, and Dye UL-s barrel. [ woodsball]
2021 Speedball Team Gun’s 4 Hire ( locals )
|
|
|
Yesterday, 06:59 AM
|
#3121
|
Scales CS1, M2, & M3s+
Join Date: Jun 2018
Location: FL
|
Yeah, dude said he got it from Billy but asked if I already had one? I don’t know BWing lol...
Definitely interested in this new Solenoid Housing though.
Wonder how adjustable it is?
Like min and max airflow? Hopefully it’s able to be adjusted to less airflow than the M3+ but then it would probably need more Dwell time too.
Sounds like Dye has some things in development!
__________________
Gonna scare you up and shoot ya, cause Mr. Charlie told me so.
|
|
|
Yesterday, 07:18 AM
|
#3122
|
Join Date: Mar 2001
Location: Proctorvegas
|
Besides 3 pieces being raw the lil mini video I did this past weekend
https://youtu.be/_4E2RTL56hE
shows the next gen Luxe internals. It isn't close up views and I didn't discuss everything but you can spot some stuff.
Only variation between those internals and ours is the dark grey parts.🤙
|
|
|
Yesterday, 09:21 AM
|
#3123
|
BTFU
Join Date: Apr 2003
Location: Indianapolis
|
Quote:
Originally Posted by Noa Bo
In defense of SP and even Dye and many other manufacturers, some stuff gets passed QC and onto the customer. Field One seems like they nailed the process though, but they are also dealing with smaller batches of guns too. Planet Eclipse is numero uno in this category imho.
|
There's a difference between QC issues and design issues. In regards to what you're referring to with DLX/SP breech-ball interaction, that's a design issue.
|
|
|
Yesterday, 12:28 PM
|
#3124
|
Back Center = Bad Back
Join Date: Dec 2014
Location: Washington
|
Charlie, I think I know what it is... I wonder if it’s a drop in upgrade for current M3s/+’s, or something being tested for the next Matrix. Maybe backwards compatibility. That way current M3 owners don’t feel left out and bst prices don’t take as drastic of a drop.
@James,
The efficiency for either version- mech or electro, is looking amazing. Paint handling is too. Any chance you can make me an ultra unicorn edition and produce a single trigger electro frame for me? This would be the stuff dreams are made of... The NEO Luxe.
Imped, I know. I’d like to see the breech shrink in all of their future releases.
__________________
Paintball Markers supplied by: Trademygun.com and Gunfightersports.com
Home Fields:
-KC Crusaders [ woodsball and speedball]
-Operation Paintball [ woodsball and speedball ]
2021 Setups:
-Prime XTS, Powerhouse Haymkr Reg, HK 80/4500 Tank, Spire 280 Loader, and Dye UL-s barrel. [ speedball ]
-CVO w/Adrenaline Frame, Powerhouse Haymkr Reg, HK 80/4500 Tank, Dye R2 Loader, and Dye UL-s barrel. [ woodsball]
2021 Speedball Team Gun’s 4 Hire ( locals )
|
|
|
Yesterday, 03:12 PM
|
#3125
|
John - conscious paradox
Join Date: Apr 2013
Location: Tyler, TX
|
It's likely the dude is referring to one of the test units Billy used with 3d printed plugs. That's really old.
__________________
"(...) the only way to speak seriously to the world today is with irony." - Umberto Eco
Back in paintball?
|
|
|
Yesterday, 05:03 PM
|
#3126
|
Scales CS1, M2, & M3s+
Join Date: Jun 2018
Location: FL
|
Interesting, first I’ve heard of it.
An adjustable Solenoid Housing would be nice...
__________________
Gonna scare you up and shoot ya, cause Mr. Charlie told me so.
|
|
|
Yesterday, 10:05 PM
|
#3127
|
John - conscious paradox
Join Date: Apr 2013
Location: Tyler, TX
|
Yeah, the range of adjustment: m3s - m3+. Nothing in between even showed up on the pressure trace.
__________________
"(...) the only way to speak seriously to the world today is with irony." - Umberto Eco
Back in paintball?
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|