[cgambino53]

Can anyone tell me how to change the feed neck. Can you just twist it off or do i need to heat it up to soften any loctite or do I have to dissasemble the entire marker. Thanks in advance.

[Mr. Charlie]

The feedneck is threaded into the metal body of the marker.

You will probably need to remove the Rhyno Skin plastic shell, then you should be able to take the feedneck off. You might have to heat it but try it first without heating.

[cgambino53]

Originally Posted by Mr. Charlie

The feedneck is threaded into the metal body of the marker.

You will probably need to remove the Rhyno Skin plastic shell, then you should be able to take the feedneck off. You might have to heat it but try it first without heating.

Thanks I'll give it a try

[Tundrawulf]

I have a quick question, I saw the thread saying that the feed neck is matrix threaded. Is that similar to the old Ion or Impulse Threaded feed necks?

[Paul77]

Originally Posted by Tundrawulf

I have a quick question, I saw the thread saying that the feed neck is matrix threaded. Is that similar to the old Ion or Impulse Threaded feed necks?

Similar as they both screw in yes.

Compatible NO, original ION/impulse is NOT the same as matrix

[Joker1991]

Rhyno skin doesnt need to be removed to remove the feed neck. I order a dangerous power clamping feedneck. Going to see how that works instead.