[silverflip]

For my LED's, I just ordered in nicads, don't know who makes them. But they work fine. I stuck with nicads, because they all have original nicad chargers My LCD is nimh, and I think there Elite's.

[FallNAngel]

Originally Posted by dr.strangelove

It's definitely JST. The solenoid plug is the 2-pin variant, ZHR-2 and the battery is the 3-pin variant ZHR-3 (or at least they both work).

As far as the crimp tool goes, do you know of any less expensive tools that work with these pins? If so I'll put up a link. The JST one is insane, it's around $500, and I couldn't confirm for sure if the universal type ones would work.

No, at least not offhand. I've heard of cheaper crimpers, though I can't remember if they were for molex or JST. Pretty sure I paid a few hundred for mine.

[EastCoastAngel]

Originally Posted by FallNAngel

No, at least not offhand. I've heard of cheaper crimpers, though I can't remember if they were for molex or JST. Pretty sure I paid a few hundred for mine.

Those plugs are available on eBay- solves having to go deep on a set of crimpers, let the lil kids in tawain do the work!!!

[ratt]

If you have a dead donor battery you can take it to batteries plus. They will build you a new one using your parts. Just had one for a speed rebuilt cost me $16.24

[Won Hunglo]

I know this is an old thread but I just want to say thanks to the OP. Some of us are trying to keep our Angels as original as possible and this post is pure gold.

[dr.strangelove]

Originally Posted by Won Hunglo

I know this is an old thread but I just want to say thanks to the OP. Some of us are trying to keep our Angels as original as possible and this post is pure gold.

Thank you, I'm glad someone is still getting some use out of the information.