[pb man]

does anyone know what size oring the azodin valve and striker needs?
i have leaks from the front of the barrel and striker.

[AR15 guy]

I need this information also.

[Jaiofspam]

i believe its 015 for the valve body and striker

[rotceh_dnih]

so far i have this list

rocksteady oring RV11 / R034 Equivalent Size: 11 BN70
inner reg can be urethane, viton, or buna. RV08 / R033 Equivalent Size: 8 BN70
reg Piston O-ring RV14 / R031 Equivalent Size: 14 BN70
Regulator Swivel Mount O-ring : R016 / R032 Equivalent Size: 16 BN70
Front Valve O-ring (Clear) - rear black : R012 / RP15 Equivalent Size: 15 BN70

[Grendal5050]

The striker itself doesn't present a leak source, but the valve certainly does. The leak from the barrel could be either the cup seal or valve orings(015) and the leak from the striker area could be either as well. The striker oring just acts like a sail to help catch blowback air instead of letting it go past and only holds pressure immediately after you pull the trigger.

Some blowbacks also need to be cocked before you gas them up or they will blow air like no tomorrow.