Hey guys!
When I pressure up my marker, there is no air going to from the LPR to the three way. If I tighten the LPR knob allowing air to fill up the LPR and enter the 3 way, air leaks straight out of the relief hole on the front of the LPR. It kind of cycles, except it also loses all of its air out of the front of the LPR.
I have tried the following:
- Greasing up the o-ring in the tip of the LPR.
- There was a leak at the base of the LPR but I wrapped the threads in teflon to fix this.
- Using a fresh tank with plenty of pressure.
Thank you for the help.