The newest high pressure regulator from Inception Designs. The HPR v.3 is now available in Polished Black, Matte Black, and Polished RAW.
This HPR was designed based off the Legendary Regulator used on the WGP Karnivor Electronic Autococker which was one of the fastest production Autocockers ever made (and our seals are still compatible with those regulators). We updated the reg within the performance pressure range used on most modern guns with a better spring stack, improved internal flow, protection for the reg seat to prevent damage, an anti-spike spring cap and we made it easier to work on by getting rid of the spring clip and by making the piston removable with a simple 10-32 bolt and the reg top with a 3/8 allen key. The rotating collar means the macro line will always align with your guns ASA. Comes with the macro line fitting.
Version 3 Features:
* New updated milling eliminating unneeded material making the HPR lighter.
* Increased output pressure range (approx.75 psi up to tank pressure)
* Over adjustment restriction - The bottom cap now prevents over adjusting.
* Updated urethane o-rings - custom made on our own tooling to ensure consistency and quality
* Custom spring washers to allow smaller pressure changes when adjusting and a greater output range. This will give you the ability to make finer adjustments with the HPR.
I just bought one of these for my 2K2 Ironmen intimidators and it gets stuck on the first threads while screwing in. I've tried it on 2 different front blocks and its the same issue for both, Any idea what the issue might be? I got the dust version on accident, could that be the issue?
and we will get you taken care of.
Your Privacy Choices