[splattttttt]

The Diadem Database
Add your info for others to reference from. No posting please, just info.

Do not post other AM markers in here. You can start a whole other thread for them.

Serial #:
Color:
Feed tube:
Loader:
Air system:
Drop:
Trigger:
Valve:
HPR:
LPR:
Bolt:
VA/Front Block:
Prefered barrel:
Board type:
Board Settings:
Special Mods:
Hpr pressure:
Consistency:
Efficiency:
Chops per Case:
Link to Pic (Optional):

[splattttttt]

Serial #:00274
Color: black to blue
Feed tube: Lapco
Loader: Empire Reloader b
Air system: NitroDuck adjusted@400psi
Drop: HybridGrind on/off, cp rail
Trigger:stock w/Magnetic return, no spring.
Valve:stock
HPR: Palmer Fatty
LPR: Palmer Micro Rock
VA/Front Block:stock~15* picture that
Prefered barrel:McDev Matchstick 7piece kit
Board type:stock So who will make the lcd now?
Bolt:modded~wideened detent guides~angled intake port
Board Settings:Semi, 20bps, Debounce25ms, dwell 13ms
Special Mods:lenghtened ram back end by 3mm~replaced stock ram spring w/ACE#12
Hpr pressure:185psi/260fps
Consistency:very tight groopings
Efficiency: not an issue
Chops per Case:none. Note: I beleive in gremlins, and because of them, it did finally chop! I discovered a nicked barb.
Link to Pic (Optional):

[Axe56]

Color: Black to Black Fade ^_^
Feedneck: Stock No-Rise
Loader: Yellow Halo B with V35 board
Air system: Crossfire 70/4500 w/ 05' Dye Rhino Cover
Drop: CP Rail with evil asa.
Trigger: Factory Blade
Valve: Factory
HPR: Evil Detonator
LPR: n/a
Bolt: Factory
VA/Front Block: Factory
Prefered barrel: J&J Ceramic 12"
Board type: Factory
Board Settings: Semi Auto
Special Mods: dye sticky3's
Hpr pressure: n/a
Consistency: +/- 3
Efficiency: easily over a case on a fill.
Chops per Case: 2-3 (it was raining when I got to play, so I'd say thats pretty damn good.)
Link to Pic (Optional):
http://www.heart-less.com/images/rawr/yum.jpg

[paintcheck132]

Color: blue to yellow fade
Loader: evlution 2
Air system: pure energy 68/3000
HPR: centerflag
Prefered barrel: j and j two peice
to Pic (Optional): pic thread / actionmarkers web page

[topslop1]

Serial #: 2805
Color: Red to Black
Feed tube: ?
Loader: Halo B V35
Air system: 68/3 System X
Drop: Am advanced on / off
Trigger: Stock
Valve: Stock
HPR: Custom Products
LPR: None
Bolt: Stock
VA/Front Block: Stock
Prefered barrel: Custom Products
Board type: Stock
Board Settings: Semi, 25 bps, 14ms dwell, 20ms debounce
Special Mods: none
Hpr pressure: 250psi
Consistency: +/- 5
Efficiency: Gotta be at least 1500 out of my tank
Chops per Case: 0
Link to Pic (Optional): http://img.photobucket.com/albums/v1.../P11200012.jpg

[xjedix]

Serial #: 002975
Color: All Black
Feed tube: Stock Mid-rise
Loader: Halo B
Air system: 3A 68/4500 800psi output
Drop: CP Razor with CP on/off asa
Trigger: Stock
Valve: Stock
HPR: CP reg w/ Bob Long 600psi guage
LPR: None
Bolt: Stock
VA/Front Block: Stock
Prefered barrel: CP 2pc.
Board type: Stock
Board Settings: Semi, 22bps, Debounce 20ms, Dwell 14ms
Special Mods: None
Hpr pressure: 200psi/285fps
Consistency: +/- 2fps
Efficiency: Not sure
Chops per Case: Zero
Link to Pic (Optional): http://img.photobucket.com/albums/v6...kif13287od.jpg

[Some Dude]

Serial #: 2797
Color: Solid Black
Feed tube: CCM clamping
Loader: Reloader B
Air system: Centerflag 45/45
Drop: Uni-Mount
Trigger: Stock
Valve: Stock
HPR: Centerflag LP
LPR: PPS micro rock coming soon
Bolt: Stock
VA/Front Block: Stock
Prefered barrel: Stiffi Switch Kit
Board type: Stock
Board Settings: Semi, 17 bps, 14ms dwell, 10/15ms debounce
Special Mods: None
Hpr pressure: 200ish
Consistency: Unkown
Efficiency: Uknown
Chops per Case: 0

I'll edit when I found out more.

[Ostwar]

Serial #: Not sure, haven’t looked
Color: Black to Blue
Feed tube: CCM Clamping No-rise
Loader: Halo B (Blue)
Air system: Crossfire 45/4500 low pressure (blue reg)
Drop: New Designz Drop Kick and EZ on/off
Trigger: Stock
Valve: Stock
HPR: Centerflag (Stock)
LPR: None
Bolt: Stock
VA/Front Block: Stock
Prefered barrel: Stock (at the moment)
Board type: Stock
Board Settings: BPS= 20, Dwell= Default, Debounce = 5 ms
Special Mods: None yet
Hpr pressure: 200ish
Consistency: 262-268
Efficiency: Not Sure yet
Chops per Case: 1-3 (Ram came loose at first, none since)
Link to Pic (Optional):
My Diadem

[nixxvalor]

Serial #:Factory Bench Prototype N/A
Color: Red/Black
Feed tube: Stock low
Loader: Halo b V35 upgrade
Air system: PMI Pure Energy 45/4500
Drop:Empire on/off
Trigger:Blade stock
Valve:Factory stock
HPR:Centerflag
LPR:n/a
Bolt:Rip Bolt stock
VA/Front Block:stock
Prefered barrel: AM Gen 1
Board type:
Board Settings:All factory stock with the exception of BPS (20)
Special Mods:None
Hpr pressure:180
Consistency: +2 +3 psi per shot count
Efficiency: approx 1500 shots per fill
Chops per Case: 1.5 depending on weather and paint

If you want a better breakdown on the numbers, I have all of it. And will type it on here for all of you!
Link to Pic (Optional):

[WinterGS]

Serial #:02777
Color: No see um Black (Affectionatly named Bettie, and a free cookie to whomever knows the girl!)
Feed tube: Stock
Loader: Halo B V35 mods
Air system: Various
Drop:AM Stock Z
Trigger:Blade stock
Valve:Stock
HPR:CF factory
LPR:none (yet!)
Bolt:Stock Rip
VA/Front Block:stock
Prefered barrel: AM Gen 2
Board type:Stock
Board Settings:BPS 20, Dwell 12 all other, factory set
Special Modsances naked around it covered in Cherry Jell-O while still in box
Hpr pressure:160-180
Consistency:More user time needed
Efficiency: 47/3000 900 spt (shots per tank) 45/4500 1300spt
Chops per Case:3 per 5 cases put through
Link to Pic (Optional):

[kbloom03]

Serial #: 002789
Color: blue to black satin fade
Feed tube: stock
Loader: halo B ( V board coming soon)
Air system: Air america the reg 68/4500
Drop: stock
Trigger: stock blade
HPR: stock
LPR: none (thinking about the micro rock)
Bolt: stock

[totdoc]

Serial #: 2909
Color: Blue to black
Feed tube: CCM clamping no-rise
Loader: reloader B
Air system: crossfire 68/4500 HP
Drop: CP Flame w/ CP degassing ASA
Trigger: Stock
Valve: Stock
HPR: AKA 2-liter
LPR: AKA SCM 2
Bolt: stock
VA/Front Block: stock
Prefered barrel: freak
Board type: stock
Board Settings: haven't decided yet...
Special Mods: Just the bolt ons
Hpr pressure: Under 200
Consistency: +/- 2 to 3
Efficiency: Looks pretty good! No deffinate counts yet...
Chops per Case: Few, if any...
Link to Pic:

[breedofspawn]

Serial #:
Color: Blue / Black Fade
Feed tube: Factory
Loader: Empire B
Air system: 45/45
Drop: Cp AsA + Adapter
Trigger: Factory Blade
Valve: Factory
HPR: Cp
LPR: Cp
Bolt: Factory
VA/Front Block: Factory
Prefered barrel: Dye UltraLite
Board type: Factory
Board Settings: SemiAuto / Turbo If I want some kick
Special Mods: Internal work on wires , now customized , also added headshrink to protect.
Hpr pressure: <200
Consistency: +- 2
Efficiency: 900 - 1200 shots on 45/45
Chops per Case: 1 maybe 2
Link to Pic (Optional):

[Headhunter1]

Serial #: 2778
Color: red/black fade
Feed tube: Lapco
Loader: Empire Reloader b
Air system: Java 68/300 adjusted @400
Drop:Empire dovetail/Phat on/off
Trigger: stock w/Magnetic return, no spring
Valve: stock
HPR: BL Torpedo
LPR: Palmer Rock mini
Bolt: stock
VA/Front Block: stock
Prefered barrel: J&J Ceramic kit
Board type: stock
Board Settings: semi, 23bps, Debounce 8ms, Dwell 13ms
Special Mods: magnetic trigger mod
Hpr pressure: 220psi / 285fps
Consistency: tight groups
Efficiency: 900-1200
Chops per Case: Barrel breaks mainly
Link to Pic (Optional):

[deadmanbluff]

Serial #:002998
Color: black
Feed tube: mid rise
Loader: soon to be halo or egg
Air system: crossfire 47 3000
Drop:no drop just a duck bill
Trigger:stock
Valve:stock
HPR:stock
LPR:none
Bolt:stock
VA/Front Block:?
Prefered barrel:cp
Board type:stock
Board Settings:stock bps:15
Special Mods:none
Hpr pressure:200
Consistency:+-4
Efficiency: 500 shots
Chops per Case:3-5 just because of my cruddy hopper
Link to Pic (Optional): none

[Teuseksi]

Serial #: 003065
Color: Red/Black Fade
Feed tube:
Loader: Halo B w/ Victory Board
Air system: Crossfire 68/4500
Drop: CP Flame Drop.
Trigger: Stock
Valve: Stock
HPR: Palmer Rock
LPR: None
Bolt: Stock
VA/Front Block: Stock
Prefered barrel: J&J Ceramic Edge 12"
Board type: Stock
Board Settings: 20bps, 13dwell, default everything else
Special Mods:
Hpr pressure: 220
Consistency: +/- 3
Efficiency: Not sure.
Chops per Case: Zero to Date.
Link to Pic (Optional):

[sailorslax88]

Serial #: 02295
Color: All black
Feed tube:
Loader: Halo B w/ cut down feedneck
Air system: Pure Energy 45/4500 Low pressure
Drop: Duckbill
Trigger: Stock
Valve: Stock
HPR: Custom Products Shorty
LPR: ANS Jackhammer II
Bolt: Stock
VA/Front Block: Stocl
Prefered barrel: Dye Ultralite .687 back
Board type: Stock
Board Settings: Turbo, 20bps,not sure about the others
Special Mods: About to do o-ring mod and ram bumber mod
Hpr pressure: Not sure
Consistency: Yet to find out
Efficiency: Yet to find out
Chops per Case: Yet to find out
Link to Pic (Optional):
http://putfile.com/pic.php?pic=12/35817443068.jpg&s=x12

[Fryloc]

Serial #: Sentinel #1319
Color: Blue/Silver
Feed tube: Glued in
Loader: Gravity at the moment
Air system: Nitro Duck 68/45
Drop: Chrome, don't know what brand
Trigger: stock
Valve: stock
HPR: Center Flag
LPR:ANS Jackhammer II
Bolt:stock
VA/Front Block:Stock
Prefered barrel: Dye Boomstick
Board type: Stock
Board Settings: Semi or turbo, dwell 11ms, debounce 5 ms, eyes on, 25 bps
Special Mods:
Hpr pressure:250
Consistency: Don't know.
Efficiency: Don't know.
Chops per Case:
Link to Pic (Optional): going to have to edit this in.

[PirateCaptain]

Serial #: 003044
Color: Black to Blue fade
Feed tube: CCM No Rise Heli Clamp
Loader: Empire Reloader B or Revvy
Air system: 72/4500 Crossfire or 70/4500 Dye
Drop: Redz Grenade ASA
Trigger: Stock
Valve: Stock
HPR: Centerflag
LPR: Stock
Bolt: Stock
VA/Front Block:
Prefered barrel: Dye Ultralight
Board type: Stock
Board Settings: Stock
Special Mods: none
Hpr pressure: 225ish
Consistency: +/-5
Efficiency: 150psi per pod
Chops per Case: In two cases, none.

I picked my Diadem ITS off eBay for $100 a couple weeks ago. I found Action Markers right after the K2 Lawsuit shut them down, and had always liked the look and design of it. I had been looking for a Diadem for a while, and finally found this one for a great price.