[aetiennee7]

OK I have an m3 black dragun its the basic electronic model I have a pmi RAZR which sucks sucks I also have a cp barrel that's OK. Hpa (3000 psi) doesn't seem to make much of a diff then co2 I also recently got a new bolt a bandit bolt similar to delrin. So I'll see if that's better then the stock bolt it had a ton of scratches so I'm hoping it'll be a lot more accurate.

Any suggestions?

[lpmaster]

certain guns will only get so "accurate" your best bet is to get a good paint to barrel match and just ride that until you get a new marker.

The problem with the old school blow backs is the operating pressure. 800psi smacking the ball distorts it more than say 200psi from a high end spool would. less ball distortion creates more consistent shots and in turn more accuracy. There are definitely things you can do to reduce your operating pressure. an inline regulator, and spring kit would allow you to tune your marker a little further but in my opinion just ride it out until you can afford to upgrade. let me know if you have any other questions via pm and i'll try to help

[aetiennee7]

Originally Posted by lpmaster

certain guns will only get so "accurate" your best bet is to get a good paint to barrel match and just ride that until you get a new marker.

The problem with the old school blow backs is the operating pressure. 800psi smacking the ball distorts it more than say 200psi from a high end spool would. less ball distortion creates more consistent shots and in turn more accuracy. There are definitely things you can do to reduce your operating pressure. an inline regulator, and spring kit would allow you to tune your marker a little further but in my opinion just ride it out until you can afford to upgrade. let me know if you have any other questions via pm and i'll try to help

I just wanted to bring this gun back to life. It was my first electric marker and I don't think id ever get rid of it so I just want to make it useable. And yes I love how accurate my spool marker is.

[lpmaster]

Originally Posted by aetiennee7

I just wanted to bring this gun back to life. It was my first electric marker and I don't think id ever get rid of it so I just want to make it useable. And yes I love how accurate my spool marker is.

Oh, there you go...that sounds like fun then

[TCpaintballer02]

are you selling your M3?