[imtgod]

Serial number : 133
Board Type: Nelson
Milling Style: Unmilled
Anno Color: Wedding Band Gold, with black accents.
Date recieved : 05/5/04
Approx num of shots: 100k
Rof: 30.3
Lpr pressure: 72
Feed tube : DBN NO RISE!
Pinches per hopper: none
Chops: none
Breaks:none
Loader: Halo B, Z-code, RipDrive
Air system: Pure Energy 68/45 HP Preset
Consistency: +-4
Efficiency: around a case a fill
Prefered barrel: Slammer 2 peice
Any problems: none
Comments: ITS GOOOOOLD!

[cguill]

Serial number : 1842
Board Type: WAS w/1.6
Milling Style: Unmilled
Date recieved : 3/15/03
Approx num of shots: 13k (air and paint total)
Rof: Unlimited
Lpr pressure: 72
Feed tube : CCM
Pinches per hopper: none
Chops: A few, depends on paint
Breaks: A few, depends on paint
Loader: halo b w/rip drive
Air system: Crossfire 88/4500 HP
Consistency: Varies with paint (+-/5 to +/-15)
Efficiency: 2.25 b/psi on 3k fill (~1330/fill)
Prefered barrel: Sceptre
Any problems: Some drop off, fixed now
Comments: When the timmies and trixes break down, they want to borrow my marker.

[bunnyfufu]

serial number : b02519
board type : pandora
milling style : unmilled
date recieved : 6/11/04
approx num of shots: 1k thus far
rof: unlimted
lpr pressure : 72
feed tube : no-rise
pinches per hopper :none
chops : none
breaks: none
loader halo v35 and/or empire reloader b
air system : '04 Conquest 68/4500 HP
consistency : +/- 7 (still in break in period)
efficiency :
preferred barrel: empire barrel size 0.684
any problems: none
comments: the rush i get from handling this sweet, light marker awesome!!

[1tallaznballer]

1. 04 viking
Serial 2236
JMJ Swirl Featherlight
Gloss pewter by Anno Tech
Pandora Board
WAS Eyes
WAS Switch
Clamping NO-Rise
JMJ Razor Trigger
Dye Stickies 3's
Uni- mount
68/4500 hp crossfire
Dye UL set
Empire Halo B

2. 04 viking
serial 1616
Unmilled Blue (soon to be cut and reannoed)
WAS Board (newest softwear)
WAS Switch
clamping No-Rise
JMJ Razor Trigger
Dye Stickie 3's
Uni-mount
68/4500 hp crossifre
Dye UL set
Empire Halo B

[verruckt]

Serial number : B01933
Board Type: Pandora with Eyes
Milling Style: Black Unmilled
Date recieved : 06/26/04
Approx num of shots: 8000
Rof: faster than I can shoot (20bps+)
Lpr pressure: 72
Feed tube : CCM clamping
Pinches per hopper: zero
Chops: yeah right
Breaks: a couple in barrel... bad paint, not the Viking's fault
Loader: Halo B with rip
Air system: Crossfire 70/4500 Peanut LP (450psi)
Consistency: good so far (+/- 4)
Efficiency: 1500 per tank
Prefered barrel: Powerlyte Scepter Kit or Matchstik (QUIET)
Any problems: Bolt was a little "sticky" at first but now she's smooth as silk
Comments: The only way you're getting this marker away from me is by prying it from my cold, dead fingers.... I have found paintball perfection, and her name is Viking.

[goforlow]

Serial number: 839
Board Type: WAS – Pandora soon!
Milling Style: none
Date received: 6/25/04 - 3rd owner
Approx num of shots: 14K
Rof: UL BPS
Lpr pressure: Stock
Feed tube: BP clamping no rise
Pinches per hopper: none
Chops: none
Breaks: depends on paint
Loader: halo b w/rip drive
Air system: CenterFlag 72/45 Preset
Consistency: not broke-in yet, but +/- 5fps
Efficiency: haven’t checked it, but guess about 1600 per fill
Prefered barrel: Evil Pipe
Any problems: none
Comments: traded my field owner my E-Orracle for this Viking…best thing I have done in my paintball history. I liked my Cocker, I LOVE MY VIKING!!!

[Cold_Silence]

Serial number #1590
Board Type: W.A.S.
Milling Style: Unmilled
Anno Color: Black Type 3
Date recieved : 1/4/04
Approx num of shots: 30,000
Rof: 21 So Far :-d
Lpr pressure: 72psi
Feed tube : CCM No Rise
Pinches per hopper: 0
Chops: 2
Breaks:7
Loader: Halo B, Z-code
Air system: Pure Energy 68/45 HP Preset
Consistency: +- ~3
Efficiency: About 1800
Prefered barrel: 5 Piece Scepter Kit
Any problems: Leaked out of RAM, fixed now.
Comments: It Rips!!

[painball_3000314]

Serial number : VK#B02167
Board Type: Pandora
Milling Style: Unmilled
Anno Color: Black
Date recieved : 6/29/04
Approx num of shots: 2,000
Rof: 20/UL
Lpr pressure: stock
Feed tube : stock
Pinches per hopper: 0
Chops: 0
Breaks:0
Loader: Halo B, Z-code
Air system: HP Crossfire 68/4500
Consistency: Haven't chronyed yet, just shot in back yard.
Efficiency: around 1900
Prefered barrel: J&J Edge Kit
Any problems: None
Comments: I love it!

[crosswalkryan]

Serial number :
Board Type: WAS
Milling Style: Unmilled
Anno Color: Black
Date recieved : May 2004
Approx num of shots: 10+ cases paint, 20+ cases dry fired maybe more
Rof: Unlimited
Lpr pressure: 70 psi
Feed tube : stock
Pinches per hopper: 0
Chops: 0 (with eyes)
Breaks:0! (never broke, only breaks ive had are chops when i didnt have eyes)
Loader: Eggy y board
Air system: PMI 68/3k
Consistency: +-2 with good paint, +-5 with crap
Efficiency: 1400 shots per 68/3k
Prefered barrel: Evil Pipe kit
Any problems: Works great. Only problem i had was finding eyes for it, but once i got those on....its like a totally different gun.
Comments: It ain't pretty but it gets the job done.

[Exzist]

Serial number : 1993
Board Type: Pandora
Milling Style: None
Date recieved : 7/10/04
Approx num of shots: 2k
Rof: Unlimited
Lpr pressure: 75
Feed tube : No rise
Pinches per hopper: None
Chops:None
Breaks:None
Loader: Halo B
Air system: 68/45 HP Crossfire
Consistency: Still being broken in
Efficiency: Little less than a case
Prefered barrel: Evil Pipe
Any problems: FSDO
Comments: Nice Gun

[MeRfCaKe]

Serial number : 2535
Board Type: pandora
Milling Style: unmilled
Date recieved : 6/15/04
Approx num of shots: 4000
Rof: Unlimited
Lpr pressure: Stock
Feed tube : stock
Pinches per hopper: nada
Chops: zilch
Breaks:few barrel breaks (due to debris in barrel)
Loader: halo b
Air system: crossfire LP 68/45
Consistency: getting better
Efficiency: never tested. i fill everytime i go back to the car. about 1500 psi for 690 shots
Prefered barrel: Dye UL
Any problems: Shoot down (dead battery. found that out later)FSDO
Comments: omg this gun is a friggin machine gun

[ilikepb]

Serial number : A00163
Board Type: WAS version1.6
Eyes: WAS
Switch: Bedlam
Milling Style: Full Mill
Color: Red
Rof: Unlimited
Lpr pressure: 72psi
Feed tube: clamping low rise
Pinches per hopper: 0
Chops: 2, don't shoot in simulate
Breaks: 0
Loader: Reloader B and X board revvy on Warpfeed
Air system: Crossfire 70/4500
Efficiency: around a case a fill
Prefered barrel: Empire kit
Any problems: none
Ups: Mitey Max and Trix grip frame w/cp roller trigger
Comments: Freakin Fast, Freakin Reliable, Freakin Efficient, Freakin Sweet

[bulzeye]

Serial number : 444
Board Type: WAS
Milling Style: half milled
Date recieved : 08/10/04 2nd owner i believe
Approx num of shots: 30,000
Rof: Unlimited
Lpr pressure: Stock
Feed tube : CCM low rise
Pinches per hopper: none
Chops: huh?
Breaks:none
Loader: egg zboard old school reloader
Air system: Nitro Duck 68/45 Preset
Consistency: +/- 5
Efficiency: 1400 shots off of 3k
Prefered barrel: Empire Kit
Any problems: i have squeegee's that need a new home
Comments: i need a new job so i can afford paint

[bryce piper]

Serial number : 00272
Board Type: WAS
Milling Style: unmilled
Date recieved : 8-16-04 (not first owner)
Approx num of shots: not sure
Rof: unlimited
Lpr pressure: stock
Feed tube : teardrop low rise
Pinches per hopper: 0
Chops: hu?
Breaks: 2, VERY crapy paint, broke in barrel
Loader: halo B new softwear
Air system: 88\4500 pmi
Consistency: + - 3, on good paint
Efficiency: 2 cases off a 4000 psi fill
Prefered barrel: 14'' UL
Any problems: it lobs more then id like it too.
Comments: WAS eye logic sucks, im going pandora. but for now it is playable.

[bubbleboy016]

Serial number : 699
Board Type: WAS
Milling Style: Unmilled
Date recieved : 8/13/04
Approx num of shots: Unknown
Rof: Unlimited
Lpr pressure: Stock
Feed tube : Low rise
Pinches Per hopper: none
Chops: None
Breaks:None
Loader: Halo b
Air system: AGD 68/3000 Flatline Adjustable
Consistency: +/- 5
Efficiency: 3/4 Case Per Fill
Prefered barrel: 14" Dye UL .689
Any problems: If this is a problem, its loud
Comments: SO much better then my Emag, much faster, no chops. I cream my pants everytime i shoot it

[THESpidey]

Serial number : 682
Board Type: Pandora
Milling Style: Unmilled
Date recieved : August 4th or 5th
Approx num of shots: Haven't checked it yet.
Rof: 20/UL
Lpr pressure: Stock (85)
Feed tube : BP No Rider
Pinches per hopper: None yet
Chops: Tons, til I sold my Shocker
Breaks: 1, paint was dented, it's cool.
Loader: Smoke Halo B
Air system: Crossfire 68/45 HP Preset
Consistency: Needs to be broken in a little bit more...
Efficiency: Wonderful so far, just gotta remember to keep it filled.
Prefered barrel: Stock (which is fine for now), Scepter, UL, CCM Kit... can't make up my mind.
Any problems: Paint money...
Comments: I'm in love...

[LuMiNoUs]

Serial number : VK#A01042
Board Type: Equalizer w/ Eyes
Milling Style: Unmilled
Anno Color: Emerald Green
Date recieved : 8/19/04
Approx num of shots: Unknown
Rof: 22
Lpr pressure: 72psi
Feed tube : CCM
Pinches per hopper: 0
Chops: 1(Broken eyes)
Breaks:0
Loader: Halo B
Air system: Looking..
Consistency: Never checked the consistancy.
Efficiency: Haven't tried a full tank.
Prefered barrel: CP
Any problems: Eyes came broken from seller.
Comments: Fastest gun i've ever owned.

[Gustopher]

Serial number : VK#A00592
Board Type: Pandora
Milling Style: Half-milled
Anno Color: Dust Black
Date recieved : 8/28/04
Approx num of shots: Unknown
Rof: 20
Lpr pressure: 72psi
Feed tube : Stock
Pinches per hopper: 0
Chops: 1 Eggs are slow...
Breaks:0
Loader: Egg2
Air system: 68/45 Nitro Duck MegaReg Adjustable
Consistency: +/-2
Efficiency: 2000shots per 4500psi
Prefered barrel: Stiffi Switch
Any problems: Can't put it down... want more Vikings.
Comments: I'm in love, AKA for Life.

[MonsterD]

Milling Style: Half-Milled
Color: Blue
Serial number : 00697
Board Type: WAS 1.6
Date recieved : 8/15/04
Approx num of shots: 8000
Rof: Unlimited
Lpr pressure: Stock(not SCM)
Feed tube : BP No rise
Pinches per hopper: 0
Chops: Once, it was a tuesday
Breaks: 0
Loader: 1 of 5 halos' i own w/ dual 9v mod
Air system: PMI 68/4500 HP
Consistency: +-/5
Efficiency: 4500 psi = more than a case(tight barrel aways)
Prefered barrel: UL
Any problems: Yeah, Its not froths BWAC!
Comments: I LOVE MY VIKING!

[Odin]

Milling Style: DC-FSP
Color: Gloss Black
Serial number : B02208
Board Type: True M5 Combo Tadao
Date recieved : 09/01/04
Approx num of shots: Only enough to lube, hasn't seen the field yet.
Rof: Unlimited
Lpr pressure: SCM-3 stock settings
Feed tube : BP No rise
Pinches per hopper: 0
Chops: None
Breaks: 0
Loader: Revy w/ X-board
Air system: 45/45 LP LegionAir
Consistency: Excellent
Efficiency: Excellent
Prefered barrel: UL
Any problems: NONE!
Comments: I love this gun!

[fomple]

Milling: Black un milled
Serial Number: 487
barrel: 16 dye boom stick
chops: none
pinches:none
ROF: stock board 18bps
shots per 68/45: 1000+
consistancy: -/+-6
Hopper: halo b with ripdrive z code
Feed tube: stock
airsystem: Crossfire 68/45
problems ...none
comments ..i finally found a gun i can pick up and shoot and not have to worry about it breaking down