[drefish99]

Please be advised this is a living document and will be updated accordingly.

Infinity Contact Info
Name - Infinity Paintball Products, LLC
Address - 11919 W. Pico Blvd, Los Angeles CA 90064
Phone - 310-914-3481 (Tue-Fri 11am - 6pm pst)
URL - www.infinitypaintballproducts.com
Email - info@infinitylegend.com , Sales & Wholesale Information cj_infinity@earthlink.net
Tue-Fri 11am - 6pm pst



**The Ultimate Sticky**

- Infinity Legend Manual

- "Halfbreed" (stock) Tadao Board Manual

- Infinity Legend WAS Board Manual

- Infinity Legend How To Videos

- PIGTV full break down video

- Official Marker Picture Thread

- Official Action Picture Thread

- Official Video Thread

- Information on the Infinity Legend

- Reviews of the Infinity Legend

- Settings Thread

- AIM Help List

-.::Legend Owners Group::.

-Pros and Cons to owning a Legend

- List of Legend Upgrades

- Legend Tadao Online Manual

- Legend Parts Swaping Thread

- Oring and Screw sizes.

Originally Posted by deadlymystery

Well I was just browsing around and realized that there is no Legend FAQ...so I thought I'd make one


Infinity Legend FAQ:

How much does the Legend cost?

Legend-$750
HK Legend-$950
LE Legend-$850

Where can I get the Legend other than directly from Infinity?

Action Village, NIB forum on PbN, and quite a few other sites on the net.

What board is in the Legend?

WAS V1 or V2

What firing modes are on the board?

NPPL, PSP, and NXL

What settings can you adjust on the board?

Dwell, debounce, eye mode, BIP delay, ROF, eye power, and firing mode.

How efficient and consistent is it?

It comes stock with a CP reg so you can expect great consistency from it and most Legends are VERY efficient. Most people get around 5-7 pods and a hopper off of a 4500 psi fill.

Do HP tanks or LP tanks work better with the Legend?

They both work fine.

How does the Legend work?



Since the Legend has a spring returned ram does it have a lot of kick?

There is a minimal amount of kick. There is really not that much kick and it isn't noticable in a game.

What's the difference between the HK Legends, LE Legends, and normal Legends?

The HK is milled differently and the LE Legends have a different anno...besides that they are all the same.

How is the barrel?

The barrel is identical to the Proto 1-piece barrel and overall it is pretty good. Most Legend owners end up getting a new barrel though.

How much does it weigh?

I do not know the exact weight but it is a little lighter and an 06 Ego.

How is the maintenance?

The Legend is a very simple gun and is extremely easy to clean. All you do is take out the ram and lube 1 o-ring.

Are any upgrades available for the Legend?

If you are buying a Legend BNIB then no because Infinity would have already put the upgraded grips, ram, bolt pin, and V2 board in it. If you have a used Legend and would like these upgrades send your gun into Infinity with $40 and your stock ram and bolt pin to get all of these upgrades.
Grips-$20
Ram and Bolt pin-$20
V2 board upgrade-FREE
That is all the upgrades that are available at the moment for the Legend. There is a lot of talk about a possible Hater board and maybe a Lucky board.


That's all I have at the moment...I will update it as soon as I get more info. If you have more info let me know and I'll add it.

Originally Posted by Swantonbomboy

Seems like there are some new questions. So I tried to answer them.

Legend FAQ Add-On 2.0
_______________________
By: Swantonbomboy
_______________________
What barrel threading does the Legend take:
Autococker

What is the recommended type of lubricant from Infinity:
light gun oil/Tri-flow/AKA gun oil


Do Legends take Intimidator eye/ wiring harnesses:
No, only the prototypes did.

[b]Do Legends take Intimidator detents[/ B]
Yes. There are many variations of the Timmy detents. Extra hard blue detents from Paintballkingdom are very popular especially being that the Legend comes with detent slots on the bolt predrilled. Here is a link to the blue detents.
[urlhttp://www.paintballkingdom.com/index.asp?PageAction=VIEWPROD&ProdID=546 [/url]

How do you tell if you have a V1 or V2 board?
The V2 board says "V2" on the back.

What type of barbs does the Legend take?
10-32 threaded barbs (same as autocockers)

Should I lubricate the ram bumper?
Yes, with a small amount of oil.

How do I tell if I have an upgraded ram and bolt pin combo?
Compare to this picture which shows the new style combo.

Also, as of March 1, 2007 all Legends come stock with the upgraded combo.

What is the difference between the HK Legend and stock Legend?
-The HK legend uses an Ego style emitter and receiver as opposed to an Intimidator style emitter and receiver. Do not be confused though Ego or Timmy replacement eyes will NOT work in the Legend or HK Legend.
-Milling
(Note the eyes for the HK Legend and stock Legend are not interchangable also)

How can I contact Infinity?
https://www.pbnation.com/showthread.php?t=1898582

What type of grips does the Legend take?
.45 degree frame grips.

There is plenty of information about lubing the ram but how do I lube my CP reg?
http://www.customproducts.us/downloa...inline_reg.pdf