[noneedforanam88]

So I got some air into my Trix and it leaked. So I want to pick up an oring kit, but I wanted to make sure that the kit will work with my Evolve bolt. I came across two kits on eBay. One is from orings-online and the other is oringcity. They say they will fit the standard bolt. Does the Evolve bolt use the same orings as a standard bolt?

[Mr. Charlie]

I’m not 100% sure...

I know the old Gen. E Matrix used Xrings for the inner Can and Top Hat 017 spots.

I’ve had good luck using Viton 75 durometer Xrings in those same places.

The older Matrices also sometimes used a Polyurethane 70 or 90 durometer Oring for the Top Hat 014 “Valve” spot.

[killerWGP212]

Yes the gold evolve 1.1s use the same same orings as the stock bolt kit. I suggest getting a 10x kit or 2 and try fitting for the best fitment as tolerances come into play with the bolt kit itself and the individual orings.