Planet Eclipse Magfed Emek MG100 - comes out this week! Watch the video!

wolf16731 · 11-10-2018, 10:52 PM

Quote:

Originally Posted by ry_goody

anyone play with some kind of scope with zoom on magfed? What would be a good scope and zoom level to put on something like this for use with FSR?

Most people will use some sort of crossbow optic (range markings are similar to FSR so it tends to work out well). But there are some other devoted high dollar optics special made for FSR use.

Many like to use an adjustable riser to get more adjustment out of a preferred optic as well.
http://first-strike.com/fs-adjustable-riser/

But if you have money burning a hole in your pocket, there is always the Carmatech Supremacy scope.
https://www.magfedproshop.com/produc...nt=40035488135

Mr Idiot Box · 11-10-2018, 11:21 PM

Quote:

Originally Posted by ry_goody

anyone play with some kind of scope with zoom on magfed? What would be a good scope and zoom level to put on something like this for use with FSR?

You should have no issues point shooting FSR they just shoot real flat and a lot more accurately. I won’t be using one not with this setup. On markers with big stocks you need them because you can’t get behind the marker with a mask on. But with this setup you should have no issues aiming like any other marker.

duckman381 · 11-11-2018, 07:52 AM

If it said it I must of missed it but what stocks will work with the mg100

TheBroz · 11-11-2018, 11:39 AM

Quote:

Originally Posted by duckman381

If it said it I must of missed it but what stocks will work with the mg100

Same as every other PE EMC kit, BT4 / Model 98 style stocks only.

FlashVonDoom · 11-11-2018, 02:09 PM

Well, I guess it’s time for me to bite the bullet and join the magfeed world. Was just gonna get a mag adapter for my pump, but one of these with an EMC kit? Heck yeah

vijil · 11-11-2018, 02:49 PM

Keen for pics without EMC kit - are there any? I'd run non-milsim.

TheBroz · 11-11-2018, 04:56 PM

Quote:

Originally Posted by vijil

Keen for pics without EMC kit - are there any? I'd run non-milsim.

It requires the EMC kit, the stock outer body does not have a hole in the bottom. Will prob need someone to 3D print an alternative if you want one.

JOESPUD27 · 11-11-2018, 06:51 PM

Quote:

Originally Posted by vijil

Keen for pics without EMC kit - are there any? I'd run non-milsim.

first post is no stock, just tac rails.

vijil · 11-11-2018, 08:14 PM

Ok. A dremel job then

sambob117 · 11-11-2018, 09:41 PM

Quote:

Originally Posted by vijil

Keen for pics without EMC kit - are there any? I'd run non-milsim.

topless mg100 pics shared on this thread:
https://www.mcarterbrown.com/forums/...-mg100-12.html

**John** · 11-12-2018, 01:58 AM

miguelcont96 · 11-12-2018, 07:16 AM

"Does it come in black?"

*John shares pictures*

*Dark Knight Theme plays...*

Ford · 11-12-2018, 09:18 AM

PE's gotta work on their marketing material... =P

Sharpies and bright construction paper? When I first saw this pic I thought it was a fake.

Scougar · 11-12-2018, 10:09 AM

I have a couple of pics without the EMC kit on it. Just can't upload any more pics here doh

NVM..I think someone already linked back to my pics.on mcb.

Will need detent retention and hopper hole cover, plus front magwell support. Best option would be printed top sheath.

Please note, design subject to change... These are prototype pics. The general design should come as no surprise to anyone familiar with the emek.

warrior24 · 11-12-2018, 10:22 AM

Any idea on using this as a pistol with all the shrouds off?

This is an instant buy for me. I personally think PE doing this has the potential to change the industry. The industry has been waiting for a reliable magfed option and no one does that better then PE. I also think magfed and specifically mechanical is where the community needs to go to see the sport take off again. The full auto revolution has really made it difficult for the average person to even consider a weekend playing paintball.

Glad you guys did this, I'm in for one if not more!

Release date window ideas? Is this a 6 month thing or sooner?

martix_agent · 11-12-2018, 10:30 AM

Quote:

Originally Posted by Ford

PE's gotta work on their marketing material... =P

Sharpies and bright construction paper? When I first saw this pic I thought it was a fake.

people really do find something to complain about, no matter what.

Scougar · 11-12-2018, 10:36 AM

I think someone already commented (and might make) how good this looks as a shroudless pistol. (At least the emek version).

Jack and crew made this unbelievably modular. Sooooo many options.

Jack Wood · 11-12-2018, 10:40 AM

Quote:

Originally Posted by Scougar

I think someone already commented (and might make) how good this looks as a shroudless pistol. (At least the emek version).

Jack and crew made this unbelievably modular. Sooooo many options.

And because it is Emek-based, there is no reason why there can't be printed bodies for it in all kinds of styles. As you said above, just needs detent retention and a blocker for the vert feed inlet.

Ford · 11-12-2018, 10:49 AM

Quote:

Originally Posted by martix_agent

people really do find something to complain about, no matter what.

My critique is neither fair or rational... If I have a point, it's sometimes less is more.

Scougar · 11-12-2018, 11:22 AM

Quote:

Originally Posted by Jack Wood

And because it is Emek-based, there is no reason why there can't be printed bodies for it in all kinds of styles. As you said above, just needs detent retention and a blocker for the vert feed inlet.

Is it wrong that I feel like I need to buy a ton of EMEK's/MG100's and just roll around on them knowing I'm gonna do bad things to them?

Yeah... it's probably wrong...

lol

Jack Wood · 11-12-2018, 11:39 AM

lol. Very wrong!