[PBX mQ-Valve RELEASE]

Since for the most part, every Cocker (Focker) out there is configured differently from the next one, the purpose of this thread is to provide your fellow Cocker afficionado with some base settings that they can use as a starting point for dialing in their mQ'ed marker.

For everyone's ease of finding which are the best settings that closely mimicks their set-up, please use the following format:

SET-UP
GRIP FRAME:
BODY STYLE:
RAM:
QEV:
BOLT:
LPR:
LOADER:
IN-LINE REG (state input pressure):

SETTINGS
(Complete below)

For example:
(EBlade)
Son- 003
Cdel - 003
Conn - 030
Coff - 019

ROF- 18.18 BPS

(RACE)
Shot 5
Dwell 5
Open 13
Load 1
Closed 15
CTO off

ROF- 29.4 BPS

Just quote this post for the format. Many thanks for sharing your settings.

[ashvang]

SET-UP
GRIP FRAME: E2
BODY STYLE: FreeFlow Lotus
RAM: Nexus
QEV: Two
BOLT: FreeFlow Nylatron
LPR: Palmer Micro Rock
HPR: CP shorty
PumpArm: CCM Straight Aluminium
LOADER: Empire Reloader B (setting3)

SETTINGS
Son- 6
Cdel - 6
Conn - 34
Coff - 66

still not working yet. (tinkering)

[Xadion]

SET-UP
GRIP FRAME: E-Blade 1
BODY STYLE: Custom (Catapult)
RAM: Eclipse Nexus
QEV: 2
BOLT: Custom Delrin
LPR: WGP Kast (tickler w/o knob)
HPR: WGP Ergo Reg
LOADER: Q-Loader and Halo

SETTINGS

-game test tomrow!

Son- 005
Cdel - 005
Con - 023
Coff - 24

[Orgotek]

SET-UP
GRIP FRAME: E2
BODY STYLE: Dye minicocker
RAM: Palmers
QEV: Palmers
BOLT: Lightning
LPR: Palmers
HPR: Sidewinder
LOADER: Hollaback!

Settings:
(EBlade2)
Son-
Cdel -
Conn -
Coff -

I added inline reg in there too, since it will have an effect on your recharge rates, and dropoff.

[shutter_elite]

SET-UP
GRIP FRAME:E-1
BODY STYLE:04 Vert
RAM:Nexus
QEV:yes
BOLT:SLIK w/ bb
LPR:STO
LOADER:Reloader B
IN-LINE REG:CP

SETTINGS
(Complete below)

For example:
(EBlade)
Son- 004
Cdel - 004
Conn - 032
Coff - 027

ROF-14.93 BPS

[yuu]

Can I request an addition to the format? How about inline reg pressure. I'd be curious to see what people are running.

[Conqueror]

Since mQs are now shipping, I will repoen this. It may be stickied in the future depending on mass participation.

CQ

[RONIN 23]

Thanks Conq.

Now I'd like to see what Otterdiver has dialed his cocker to.

Folks, please post settings with you guns chroned at 270-280fps.

[man_animal71]

SET-UP

GRIP FRAME: Race
BODY STYLE: 01 Texas Storm Black Magic
RAM: SMC
QEV: 2, FF
BOLT: Slik (Bolt/Pin/Back Block)
LPR: Micro-Rock
LOADER: Halo-B
IN-LINE REG: AA Messiah

SETTINGS

(RACE)
Shot: N/A
Dwell: N/A
Open: N/A
Load: N/A
Closed: N/A
CTO: N/A

ROF- N/A BPS

[reaper61]

This is a good idea for a thread on the mQvalve.

I would also like to see your pre-mQvalve settigs vs your post-mQvalve settings. Kind of a before and after "picture" of what the mQvavle can do...?

I have an mQvalve coming and will be posting the the pre and post settings...

[Ash-=RBL=-]

Grip frame: E2
Body: 04 Custom
Ram: FreeFlow (Smc)
Qev's: G-force micro qevs
Bolt: FreeFlow (old style not that nylatron crap;p)
Lpr: AkA SCMIII
Hpr: AkA 2-liter
Loader: Halo Rip V35

EDIT:
My Mq valves came today I will drop some settings for you guys once I get them installed and running
Settings: Tomorrow
Rof?

[otterdiver1]

Originally posted by RONIN 23
Now I'd like to see what Otterdiver has dialed his cocker to.

Ok here's where we're at so far:

SET-UP
GRIP FRAME:E-1 with double tap trigger mod
BODY STYLE:03 Vert
RAM:prototype
QEV:yes
BOLT:prototype
LPR:Tickler
LOADER:Qloader
IN-LINE REG:Aim 68

SETTINGS

Son- 006
Cdel - 006
Conn - 023
Coff - 019

ROF-Need to get to a field chrony

These settings were about the lowest I could go w/o eyes and with the lpr set to pinch. I think if I crank the LPR up a bit I can lower these some more.

Inline was set at about 300 which gave me 274 +- about 3. nice!

Still room for a bit of tweaking and will report.

[Ash-=RBL=-]

Its 20.83


Whoopee...

[RONIN 23]

Originally posted by Shocker s/f
thanks Xadion ill try 4/4 then if i get bounce ill up them as needed..

son 002
cdel 003
con 030
cto 255
coff 023
bald 001
empd 002
tpul 004
trel 004

[DK1]

Can we maybe delete out any posts that don't actually contain settings? There's no reason to have a lot of clutter here as we already have a few MQ mega threads for chit chat.

This thread should have about 3 or 4 posts so far. I mean, wait till you actually have the valve and then post valid settings. We've got as many blank settings posts as posts with content.

I'm not trying to be a hard-case, but every MQ thread blows up into 150 posts of nothing.

DK1

[kleners]

i deleted mine until the MQ is installed. sorry guess the bug bit all of us.

[shady_lizard]

SET-UP
GRIP FRAME:E-1/ZeroB
BODY STYLE:halfblocked FF Rhythm
RAM:Belsales 44mag
QEV:Yes
BOLT:Custom
LPR:Micro Rock
LOADER:Reloader B
IN-LINE REG:CP (set to ~300psi)
SETTINGS
(Complete below)

(EBlade)
Son- 3.4
Cdel - 4.1
Conn - 65
Coff - 26

[Deep Sea]

SET-UP
GRIP FRAME: Race
BODY STYLE: 99 STO
RAM: Eclipse 44
QEV: Eclipse X 2
BOLT: Karnivorr
PUMP ARM: Macdev Ti
LPR: ANS
LOADER: Halo B (Z code)
IN-LINE REG (state input pressure): CP reg, around 300 psi

SETTINGS

RACE (running Monkey Firmware)
Shot 8
Dwell 8
Open 12
Load 25
Closed 24
Default Load 23

Keep in mind that these settings are running the Monkey Firmware. There are some key differences with it. One, the Load time is now over ridden with the eyes on, so the 25 is just a conservative setting for my loader if the eyes fail on field. The default load is the max ROF the software will allow. I may drop the shot and dwell down to 7 after I get some good onfield and chrono time this weekend. Will update as needed.

[DW72]

SET-UP Gun 1
GRIP FRAME:E-1
BODY STYLE:Advance Concepts
RAM:Nexus
QEV:Yes
BOLT:A+
LPR:Jack Hammer
LOADER:Reloader B
IN-LINE REG:WGP Black Magic Atound 280 psi
SETTINGS
(Complete below)

(EBlade)
Son- 006
Cdel - 001
Conn - 026
Coff - 031
Tpul - 2
Trel- 2
SET-UP Gun 2
GRIP FRAME:E-1
BODY STYLE: WGP 2k2
RAM:Kapp Phat
QEV:Yes
BOLT:A+
LPR:Jack Hammer
LOADER:Reloader B
IN-LINE REG:Hybrid(Around 280)

SETTINGS
(Complete below)

(EBlade)
Son- 007
Cdel - 001
Conn - 025
Coff - 030
Tpul- 2
Trel- 2

[regular13]

SET-UP
GRIP FRAME: ANS Race/Monkey firmware
BODY STYLE: Turtle Autococker
RAM: Eclipse
QEV: Eclipse
BOLT: Turtle
LPR: MicroRock
LOADER: V35 Halo
IN-LINE REG (state input pressure): CP~280psi

(RACE)
Shot 6
Dwell 4
Open 1
Load 1
Closed 20
CTO off

ROF- 38.5 BPS...get around 20 with paint.

[spyder_man_40200]

are your guys ROF's with or without paint? i'm guessing without of course.