· Clean and regrease the inner front o-ring in the fire chamber (17/70 with most bolt kits; 17/90 with Evolve kits); replace if necessary. This is the most common cause. Replacement recommend.
· Clean and regrease the outer front o-ring on the fire chamber (22/70) and the front o-ring on the bolt guide (12/70). Again, replacement of these seals is recommended.
· Make sure the bolt isn't scratched. If it is, it will need to be replaced.
· The o-ring grooves may be scratched. If this is the case then the part would need to be replaced. In unlikely events, the inside of the Shocker body is scratched.
if that doesnt work gisgo or fish will set you straight
I'm gonna do all these whippets and pass out, good luck OK.
-Bob Lee Swagger