[_slash_1]

hey i have a stroker thats in pieces and would like to put it together. if anybody has a diagram, manual, or anything to show the arrangement of internals id be greatly appreciative.

[fossilhead]

http://www.palmer-pursuit.com/techpages/index.htm

There's a place to start.

It has some tech info on the typhoon and stroker. You'll most likely need a sheridan valve tool. What marker was it originally?

[_slash_1]

thank you fossilhead, i checked your link and didnt find the information i needed however.

i believe it was origionally a pmi.

all i really need to know is how to put together the lower tube. The valve side is ok, its everything behind the regulator im sketchy on. I have bunch of pieces, im left with. a spring, two silver pieces, a large cylinder, a smaller cylinder and, a tiny brass piece resembling a cupseal etc.

if anybody could give me a diagram or picture of the order these parts assemble, or just tell me step by step how you assemble this part of the gun.

thanks in advance

[fossilhead]

Are you trying to assemble the Rock?
Or the Hammer, valve etc.?

[_slash_1]

the rock. i appear to be mising pieces.

[fossilhead]

Hmmmm.....My advice would be to email Palmer's.