[afortuna]

Does anyone know where I can get a replacement LPC for a Mongoose I LCD? My wife hates that dang spike look and hasn't been happy about my having that gun? Second question, will either Top cocking or Rear cocking Superfly bolts work for the Mongoose I LCD? Thread responses appeared to be a bit vague. Thanks in advance guys.

[Wickdchyld]

Now I don't own the Mongoose 1 but I do own the Mongoose 2.

I believe that your talking about the Volumizer & Vertical adapter and even your expansion chamber..Right? I listed things you can do for all three of them in the first post and i do believe that they will work on the the goose 1...

Now again I don't own the goose 1 but I'm 99% sure you can use you can use the ST super fly Long rear cocking bolt or the ST super fly top cocking bolt ..

[afortuna]

Both guns are the same, other than the milling. The Low Pressure Chamber, or spike, coming out under the barrel in the Goose is what I was talking about. Diablo changed the shape a bit for the II.

Thanks on that bolt info. The top cocking Superfly is cheaper than the rear cocking.

[Wickdchyld]

Yeah the spike your talking about is the volumizer and that's connected to the Vertical Adapter and your expansion screws up into the VA... so you want to replace all three or just the volumizer?

[afortuna]

Thanks. I see that Check it Products 15 degree link.

[[NA]WARLORD]

Originally posted by bambam123
what triggers work for the zip kit

I would try any trigger that would fit the T-1, Zenitram and thebetterone are the ones that come to mind.


http://www.freewebs.com/bettertriggers/dragun.htm


http://www.zenitram-mfg.com/

[-DiablowS-]

alright i have a goose 2 and i was wondering wat reg i should get but my gun is at like 800-850 psi of nitros and i was wondering if there was a reg that would work. caus ei kno a lot of regs that only can handle like 500psi and if i used that one it would reck my gun so i was wondering if u guys have any suggestions. if so catch me on aim or leave one here
thx

[Wickdchyld]

Here's one i just got and a great deal.. Evil Detonator Inline Regulator Link

But theres others i have listed on the frist page....

[-DiablowS-]

yea but that one only goes up to 500psi my gun wont work cuz its at 800-850 psi

[Wickdchyld]

It's on mine now and works fine... go look at in in the pictures thread

[-DiablowS-]

ur pic doesnt come up at that link

[-DiablowS-]

do u have a low pressure kit on it if so which one ?

[Wickdchyld]

here with my new upgrades Link

these are the things i took off ...Expanision Chamber and replaces it with the Evil Reg, The Vertical Adapter and volumizer and replaced it with the Checkit Assault block, stock drop and replaced it with the stiletto 15* w/ on/off..

[trigerhppydiablo]

i have a reincarnation and just put a t-board and eyes in it but i need some wrath eye covers, does anybody have any they could sell me or know where i could get some?

[-DiablowS-]

so wiked child wat psi does ur gun run at now and wats the name of the part where the evil reg is screwd into and would i b able to get a cp reg?

[-DiablowS-]

u need the volumeizer to use a reg right? cuz doesnt it cut down the psi goin trough the gun

[-DiablowS-]

also how do u put a picture underneth ur name i cant figure it out?

[Wickdchyld]

1. Here's where my pressure is at when i air it up you will see the red arrow

2. The part that the evil reg. is called Check it Assault block and i got it because it will allow more air to flow thru and bigger chamber. I got the evil because JJ side it would work great for what I'm doing.. I use the evil reg. in the stock Vertical adapter and volumizer and it worked good

The neat thing i notice with my HPA evil reg. & Assault block is that theres way less kick and not that loud and more and today i ran two hoppers full(halo b) ripping the rocking trigger up and not one problem and no chop and that sweet if you ask me...

3. Picture under your name (Avatar) you go in to your profile>then go to Edit options>scroll down to the bottom and there where you do it...

[-DiablowS-]

ok but is there any way that i can lower the pressure or just shoot it and it will go down. cuz i dont no y it runs so high if any one knos a sloution plz tell me. thank u.

[Wickdchyld]

Yeah you can turn it down by that allen screw next to the gauge you get to low it will burppp sound ...don't adjust when aired up...I believe you screw it all the way in and pressure up the gun and it will be low and slowing open till you hit what PSI you want...

[Ryantheeskimo]

Hey Wickd, Can I lower the PSI my gun's using on my stock reg and stuff and still shoot fine? If so, what PSI do you suggest I try shooting at..?