I've seen this question come up a couple of times and no ones given a difinative answer. So I pulled the stock bolt out of my T.E.S and compared the 2 using the pull pin to line them up air port to air port. The ports line up with the TES being a little bigger. The front o-ring on the Diablo bolt is a little farther forward than the TES bolt. The Diablo bolt is maybe half a mm longer than the TES bolt. This got me thinking so I compared the Diablo to my Timmy Jam Bolt. The port on the Jam is huge, so it ovelaps the port on the Diablo.The Diablo is a whole mm longer than the Jam Bolt. So, I would have to say that Timmy bolts should work on the Reincarnation. Both the stock TES bolt and Jam bolt fit inside the Reincarnation as well as they fit in the TES (i.e. no binding, no huge gaps)
Last edited by jjdustr340 : 02-17-2005 at 07:08 PM.