|
Archived Thread - Cannot Edit
|
02-04-2005, 10:21 PM
|
#1
|
|
iLLuSioN
Join Date: Feb 2004
Location: Boston,MA
|
crazy inconsistancy
well i was chroning my gun( i reset both my hyper 2 and inline, and i had previously lubed everything before this).i turned my hyper 2 out to try to get it at around 260..and it was all over from like 204 then to 250 then 254, 237 then stayed from around 245-265..i set my lpr cuz i was frustrated..but i was just wonderin what i could do about it.
__________________
617
|
|
|
|
02-04-2005, 10:23 PM
|
#2
|
|
Flying Cuban
Join Date: Nov 2004
Location: Oside
|
well u could get a new reg
|
|
|
|
|
02-04-2005, 10:24 PM
|
#3
|
|
The Dreamer Of Dreams
Join Date: Jul 2004
Location: Libertyville, Il*847*
|
make sure there is no lube in ur breech , can cause balls to go everywhere, and make it inconsistant,u might have over lubed it or , not enuff,or put it together wrong, double check everything
|
|
|
|
|
02-04-2005, 10:31 PM
|
#4
|
|
cRew
Join Date: Sep 2004
Location: Beantown Ma.
|
how old is the reg? sometimes u have to break in a reg a little before it is consistent. could be a lubing issue but sounds reg based to me.
__________________
upTon 187 cRew Powered by: Fox 4 Paintball, Planet Eclipse, Kee, Empire, RPS
|
|
|
|
|
02-04-2005, 11:10 PM
|
#5
|
|
iLLuSioN
Join Date: Feb 2004
Location: Boston,MA
|
guns about 3 weeks old, used about 5 times ( probaly about 5-6 cases)
__________________
617
|
|
|
|
|
02-05-2005, 02:56 AM
|
#6
|
|
Join Date: Jul 2004
Location: Glendora
|
reg should already be broken in.
If you just recently lubed your reg and lpr and didn't dry fire with the barrel off, it's possible that lube got into your barrel.
There are tons of factors affecting velocity. Make sure all the orings on your bolt are lubed and are in good order, same with reg and lpr
__________________
Setup:
Femme DM4
Black Reloader B
Pure Energy 68/4500 w/ Blue Dye Rhino
|
|
|
|
|
02-05-2005, 10:22 AM
|
#7
|
|
Join Date: Aug 2004
Location: Boston
|
Quote:
Originally posted by Skunkable
how old is the reg? sometimes u have to break in a reg a little before it is consistent. could be a lubing issue but sounds reg based to me.
|
the techs at my store say breaking a reg in is a myth, i believe them after all the regs i have used, all 2 of them (gen x-2 and hyper2) they have been +-2 or 4 on my first use
__________________
Northeastern University #3
El Dorado Gunfighters #3
Synergy
Fox 4 Paintball
|
|
|
|
|
02-05-2005, 10:34 AM
|
#8
|
|
.
Join Date: Feb 2032
Location: Rochester, NY
|
Battery.
|
|
|
|
|
02-05-2005, 10:37 AM
|
#9
|
|
Im all right...
Join Date: Jan 2005
Location: Scottsdale, AZ
|
|
|
|
|
|
02-05-2005, 11:07 AM
|
#10
|
|
Join Date: Jul 2004
Location: Glendora
|
Quote:
Originally posted by DeadStr8Paint
the techs at my store say breaking a reg in is a myth, i believe them after all the regs i have used, all 2 of them (gen x-2 and hyper2) they have been +-2 or 4 on my first use
|
Ya, same here, just goin on what the manual says. It just says that the Hyper 2 will need a break-in period of like 2500 shots to let the seat form to the piston and such.
__________________
Setup:
Femme DM4
Black Reloader B
Pure Energy 68/4500 w/ Blue Dye Rhino
|
|
|
|
|
02-05-2005, 11:12 AM
|
#11
|
|
Adult Movies
Join Date: Mar 2004
Location: High Street
|
relube it w/ dow or slick hone, dye lube is complete ****
__________________
Robtown Army
Fueled by:
Indoor Landscaping
Assassin Paintball
Gruntbull Annodizing
Rob's Garage
"Originally posted by bluedevils0017:
you say passed out, i say just right"
|
|
|
|
|
02-05-2005, 01:06 PM
|
#12
|
|
Flying Cuban
Join Date: Nov 2004
Location: Oside
|
do u really think that relubing the reg wit another lube would help a lot
|
|
|
|
|
02-05-2005, 01:12 PM
|
#13
|
|
Flying Cuban
Join Date: Nov 2004
Location: Oside
|
if ur not getting drop off, but u raise ur lpr and dwell anyways will u shoot straighter
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
