Find fields & stores near you!
Find fields and stores
Zipcode
PbNation News
PbNation News
Community Focus
Community Focus

Reply
 
Thread Tools
Old 11-07-2005, 06:54 AM #22
baldusi
 
 
Join Date: May 2004
Location: Buenos Aires, Argentina
 has been a member for 10 years
Quote:
Originally Posted by disrupter006
Can anyone confirm the M22x1.5 spyder barrel threads? If so, do you know a way i can fix the threads on my barrel (they are spyder, but they wont screw all the way into my TL-X)
I've measured with a thread gauge and a digital caliper. I actually have the taps and they work perfectly.
baldusi is offline   Reply With Quote
Old Sponsored Links Remove Advertisement
Advertisement
Old 11-07-2005, 09:37 PM #23
PTflyer
 
 
Join Date: Sep 2001
 has been a member for 10 years
anyone know the thread size of an Impulse Hammer Cap ?
__________________
Now just- too many autocockers!
PTflyer is offline   Reply With Quote
Old 11-08-2005, 12:20 AM #24
warpedmephisto
Moderator
 
warpedmephisto's Avatar
 
Join Date: Jan 2002
Location: Columbia, IL
warpedmephisto is a Supporting Member
 has been a member for 10 years
Quote:
Originally Posted by A5_Kyle_A5
warped isnt there another number u need for taps? like i found something x 1.6mm?

Yeah, sorry, wasn't thinking when I posted that. The thread pitch is 0.35mm I believe.
warpedmephisto is offline   Reply With Quote
Old 11-08-2005, 12:26 AM #25
Ydna
timetraveler
 
Ydna's Avatar
 
Join Date: Oct 2003
Location: Tecumseh MI
Ydna is a Moderator
Ydna is a Supporting Member
 has been a member for 10 years
Ydna is BST Trusted
Somebody can add this chart I made for screws and many threads used by Smart Parts
http://www.zdspb.com/tech/misc/resources/spthreads.html
Copy and paste the sizes, or just link to it...whichever works...
__________________
ydna@zdspb.com - [ZDSPB.com]
Nummech Products
Thin Air Sports

As told by Stobaeus
...someone who had begun to learn geometry with Euclid, when he had learnt the first theorem, asked Euclid "What shall I get by learning these things?" Euclid called his slave and said "Give him threepence since he must make gain out of what he learns".
Ydna is offline   Reply With Quote
Old 11-09-2005, 09:25 PM #26
PBPRO19
 
 
PBPRO19's Avatar
 
Join Date: May 2004
Location: Seabeck, WA
PBPRO19 is a Supporting Member
 has been a member for 10 years
PBPRO19 owns a Planet Eclipse Ego
anyone know the die size for a threaded cocker feedneck?
PBPRO19 is offline   Reply With Quote
Old 11-11-2005, 12:34 PM #27
PBPRO19
 
 
PBPRO19's Avatar
 
Join Date: May 2004
Location: Seabeck, WA
PBPRO19 is a Supporting Member
 has been a member for 10 years
PBPRO19 owns a Planet Eclipse Ego
anyone?
PBPRO19 is offline   Reply With Quote
Old 12-02-2005, 05:19 AM #28
SterlingSovereign
 
 
SterlingSovereign's Avatar
 
Join Date: Feb 2005
According to this:

http://www.airsoldier.com/cgi-bin/mi...gory_Code=MISC

The cocker barrels are ----- 15/16"-20, GH-5
SterlingSovereign is offline   Reply With Quote
Old 12-02-2005, 06:33 AM #29
baldusi
 
 
Join Date: May 2004
Location: Buenos Aires, Argentina
 has been a member for 10 years
Cockers are 15/16-20. Traditionally G7 (+50 micron) TAP is used for female threads.
If you want to die a barrel or other male threads, don't. It's next to impossible to get it correctly aligned. Single point it on a lathe. But if you wan't to go the die route anyway (may be for a muffler), then dies are usually adjustable. Just adjust it a little more than necessary so it enters any thread.
baldusi is offline   Reply With Quote
Old 12-02-2005, 07:30 AM #30
JoshGrrrr
@!?#%&$
 
JoshGrrrr's Avatar
 
Join Date: Mar 2003
Location: ~BFE~
JoshGrrrr is a Supporting Member
 has been a member for 10 years
JoshGrrrr is playing at Living Legends III
JoshGrrrr supports our troops
Quote:
Originally Posted by baldusi
Cockers are 15/16-20. Traditionally G7 (+50 micron) TAP is used for female threads.
If you want to die a barrel or other male threads, don't. It's next to impossible to get it correctly aligned. Single point it on a lathe. But if you wan't to go the die route anyway (may be for a muffler), then dies are usually adjustable. Just adjust it a little more than necessary so it enters any thread.



The only way I've found to get a tap started straight consistaintly on a lathe is a method I myself thought up..lol

Make a male part with a taper on the end, sort of like a dead center. Now, thread about an inch of that end just behind the taper. Put that part in the tail stock in a drill chuck, screw the die backwards onto that part. Slide the tail stock forward until the part goes into your peice you want to thread, sort of like a center would. Now, as you unscrew the die from the part you made, it will start to thread onto the new part perfectly straight.
JoshGrrrr is offline   Reply With Quote
Old 12-03-2005, 12:53 PM #31
Have Blue
Moderator
 
Have Blue's Avatar
 
Join Date: May 2001
Location: Milwaukee, WI
Have Blue is a Supporting Member
 has been a member for 10 years
AKA uses (or used to - I think they probably thread mill the barrel threads now) a G7 tap for the barrel threads. I sell a G5 tap, as it's the only size I could readily acquire without getting them custom made.

AKA feednecks are not 15/16-20 GH7 - they're very close, but here's the official spec: http://haveblue.org/tech/excalibur/feedtube4.pdf

Finally, Phantom barrels are the Acme 'stub' thread, not full Acme profile.
__________________
Air Soldier Products, Inc.
Have Blue is offline   Reply With Quote
Old 12-03-2005, 06:33 PM #32
baldusi
 
 
Join Date: May 2004
Location: Buenos Aires, Argentina
 has been a member for 10 years
I've read Lapco's Colin stating that the need for G7 tolerance was due to older Lapcos being a bit out of spec (due to the Type III anno). But now all the barrel manufacturers make them slightly undersizes, so you can hard anno a G5 tapped thread.
baldusi is offline   Reply With Quote
Old 12-11-2005, 12:15 PM #33
The Shocker Rocker
 
 
The Shocker Rocker's Avatar
 
Join Date: Jul 2004
Location: Three Oh Too
 has been a member for 10 years
my friend wants to know what threads a mokal feedneck has? he thinks its the same as angels?
__________________
ICK
ICK
ICK
609 boys by bradbphoto.com
The Shocker Rocker is offline   Reply With Quote
Old 12-12-2005, 04:05 PM #34
CoreyGill
Resident Wise-guy
 
CoreyGill's Avatar
 
Join Date: Aug 2005
Location: Tx
CoreyGill is a Supporting Member
are cocker grip frame screws also 10-32? and what are the threads on a ram shaft
__________________
"Originally posted by Dr.StraightPride: There once was a boy named Johnny. Johnny enjoyed PbNation and paintball in general. He enjoyed reading information and trying new modifications to his marker based on PbNation users' experiences. Unfortunately, Johnny could not spell. At all, ever. Not on Sunday or Wednesday. hI sP3lT lyK3 d1S. Then one day, I beat Johnny's head in with an iron pipe.
Then Johnny put a B/S/T post in the WGP forum and I ate his spleen."

Last edited by CoreyGill : 12-12-2005 at 04:09 PM.
CoreyGill is offline   Reply With Quote
Old 12-23-2005, 03:55 PM #35
HKforlife
Evil For Life
 
HKforlife's Avatar
 
Join Date: Nov 2005
Location: C-Bridge
Ok so grip frame screws are 10-32 right but what drill bit would I use for that?
__________________
Impact Fan Club #33
HKanada
!L.C.N!

"learn to get high and pull drive-bys"

Miles
HKforlife is offline   Reply With Quote
Old 12-23-2005, 05:23 PM #36
warpedmephisto
Moderator
 
warpedmephisto's Avatar
 
Join Date: Jan 2002
Location: Columbia, IL
warpedmephisto is a Supporting Member
 has been a member for 10 years
Use a #21 drill for 10-32 threads.

CoreyGill - (Compliments of haveblue.org)

Note that older cockers (probably pre-96 or so) had ram threads that were threaded 5-40 (which is actually the correct thread size for a 1/8" shaft), while newer rams are threaded 6-32 (and thus the threads are not 'full' threads, but they do work well enough (plus, 6-32 is a much more common thread size).
warpedmephisto is offline   Reply With Quote
Old 12-23-2005, 05:52 PM #37
HKforlife
Evil For Life
 
HKforlife's Avatar
 
Join Date: Nov 2005
Location: C-Bridge
Thanks allot
__________________
Impact Fan Club #33
HKanada
!L.C.N!

"learn to get high and pull drive-bys"

Miles
HKforlife is offline   Reply With Quote
Old 12-27-2005, 03:28 PM #38
pbkid25
 
 
pbkid25's Avatar
 
Join Date: May 2005
does anybody know the size of a spyder's velocity adjuster threads?
__________________
98% of American teenagers have tried pot. If you are part of the 2% that hasn't, put this in your signature.
pbkid25 is offline   Reply With Quote
Old 01-26-2006, 07:55 PM #39
warbeak2099
That is my foot!
 
warbeak2099's Avatar
 
Join Date: Jun 2003
Location: Wouldn't u like to know!
 has been a member for 10 years
Anyone know the measurements of eblade eye cover screws?
__________________
US Navy Baller
UL'd 07 PMR F/S, PM me if interested!
#12 Italian Baller
“The real test of a man is not how well he plays the role he has invented for himself, but how well he plays the role that destiny assigned to him.”
-Václav Havel
warbeak2099 is offline   Reply With Quote
Old 01-26-2006, 08:06 PM #40
warpedmephisto
Moderator
 
warpedmephisto's Avatar
 
Join Date: Jan 2002
Location: Columbia, IL
warpedmephisto is a Supporting Member
 has been a member for 10 years
They are flat head socket cap 4-40 threaded by 1/4" in length (measured from end to end including the head).
warpedmephisto is offline   Reply With Quote
Old 02-01-2006, 02:22 PM #41
F.E.A.R._Sniper (Banned)
Death Incarnate
 
F.E.A.R._Sniper's Avatar
 
Join Date: Jan 2006
Does anyone know the barrel threading size for an A-5 barrel?
F.E.A.R._Sniper is offline   Reply With Quote
Old 02-01-2006, 08:40 PM #42
baldusi
 
 
Join Date: May 2004
Location: Buenos Aires, Argentina
 has been a member for 10 years
7/8-20
baldusi is offline   Reply With Quote
Reply


Thread Tools

Posting Rules
Forum Jump