New Designz Nerve "Equalizer" Pro Delrin Bolt - 32.99
New Designz Clamping Feedneck - 29.99
Shocktech Clamping Feedneck - 38.99
Check-it sure fit low rise feedneck - 29.99
Extreme Rage Clamping Feedneck - 19.75
New Designz Detent - 13.99
New Designz Detent pair - 24.95
Kila 2 Magnetic Detent - 24.95
Kila 2 Magnetic Detent pair - 45
Dynasty Trigger - 27.99
Freeflow "A" Trigger - 34.99
Freeflow Blade Trigger - 34.99
Nasty-X Blade Trigger - 29.99
New Designz RIP Trigger - 32.95
New Designz Wave Trigger - 32.95
New Designz Roller Trigger - 35.95
New Designz Flame vented backplate - 27.95
New Designz Skill vented backplate - 27.95
many regs available
New Designz Slik Shot Hammer Shaft - 27.95
New Designz LPR tester - 25.95
New Designz SS Ported Manifold - 32.95
*All Prices Taken From Punisherspb.com
For those with surgons hands:
well depending on ur seial nimber u might already havee a flipped switch but...
For those who can solder but dont have surgon hands...
Other Misc. Mods
SFT O ring Chamfer Mod:
This mod involves grinding down the effective edge of the o-ring groove to help eliminate barrel breaks. If your Shocker consistently chops paintball after paintball right at the start of the barrel (definitely not in the chamber, as this is a different problem), then this modification will most likely eliminate the problem.
Shave down your trigger for a lighter pull
LED color change
If you’re sick of the stock blue LED, I can install a new one onto your board. This new LED will shine through your power switch just like the stock blue one does. This mod will void your warranty.
Can Be Done by Ydna...zdspb.com
This is a custom modification that involves installing a new LED someplace else on the back of the marker. The blue LED above the power switch actuator will no longer shine; it will be replaced by the new relocated one. This mod will void your warranty.
Can be done by Ydna....zdspb.com
(update, ydna no longer offers this)
1. Remove Your Board
2. Change Rebound Settings (Not For All Shockers)
3. How To Change Your Dwell
-Thanks To Ydna