Boss Blade Trigger - PbNation
Find fields & stores near you!
Find fields and stores
Zipcode
PbNation News
PbNation News
Community Focus
Community Focus

 
Archived Thread - Cannot Edit  
Old 11-04-2004, 03:22 PM #1
Terrorking
Sir Chop-A-Lot
 
Terrorking's Avatar
 
Join Date: May 2004
 has been a member for 10 years
Boss Blade Trigger

im thinking about buying the Boss Blade Trigger... but how long does did/does it take you to install it? is it ez as pie or is it hard enough were u gotta take it to the pb store? Also do you have to take apart/off the trigger frame from the guns and unwire alot of stuff??? or does any1 have a walk through?
__________________
Black/Blue Piranha Evo
Extreme Rage Clamping Feedneck
Cp regulator
14" progressive barrel
Terrorking is offline  
Old Sponsored Links Remove Advertisement
Advertisement
Old 11-04-2004, 03:31 PM #2
Forsaken Nukkas
You roll...we roll harder
 
Join Date: Aug 2004
Location: Denton, Texas
 has been a member for 10 years
its really easy, no need to take to the pb store. I did it myself without instructions in 5 minutes.
Forsaken Nukkas is offline  
Old 11-04-2004, 03:34 PM #3
Terrorking
Sir Chop-A-Lot
 
Terrorking's Avatar
 
Join Date: May 2004
 has been a member for 10 years
ok... so wut did u do... lol
__________________
Black/Blue Piranha Evo
Extreme Rage Clamping Feedneck
Cp regulator
14" progressive barrel
Terrorking is offline  
Old 11-04-2004, 03:34 PM #4
dbleug22990
 
 
Join Date: May 2004
Location: ~Oklahoma~
 has been a member for 10 years
he sends instructions with it, it is very easy i will try to explain it
1.take off trigger frame
2.unscrew the 2 screws holding in the top board
3.take a small puch and punch ou the pin holding in the trigger return spring(he sends a diagram to show u)
4.take ou the spring and replace the pin
5.punch out the pin holding in the stock trigger
6.carefully pull up the top board(you may need to remove the battery to get the wires to give more room)
7.pull out trigger
8.replace with boss blade
9.put the pin back in, replace board screws, and replace put the trigger frame back on
__________________
OFFICIAL DBLEUG22990 FANCLUB MEMBER #1
OLD Feedback
dbleug22990 is offline  
Old 11-04-2004, 03:36 PM #5
Terrorking
Sir Chop-A-Lot
 
Terrorking's Avatar
 
Join Date: May 2004
 has been a member for 10 years
lmao i just posted and when it finished loading u posted lmao...
so u unscrew the trigger frame from the gun... do u have to disconnect all the wires and such?
__________________
Black/Blue Piranha Evo
Extreme Rage Clamping Feedneck
Cp regulator
14" progressive barrel
Terrorking is offline  
Old 11-04-2004, 03:37 PM #6
dbleug22990
 
 
Join Date: May 2004
Location: ~Oklahoma~
 has been a member for 10 years
yes unscrew the fram, and you dont have to disconnect any wires
__________________
OFFICIAL DBLEUG22990 FANCLUB MEMBER #1
OLD Feedback
dbleug22990 is offline  
Old 11-04-2004, 03:40 PM #7
Terrorking
Sir Chop-A-Lot
 
Terrorking's Avatar
 
Join Date: May 2004
 has been a member for 10 years
ok thats good... ok i think im done... thx
__________________
Black/Blue Piranha Evo
Extreme Rage Clamping Feedneck
Cp regulator
14" progressive barrel
Terrorking is offline  
Old 11-04-2004, 05:47 PM #8
madman360
im bunker'd
 
madman360's Avatar
 
Join Date: Apr 2004
Location: Daly City, CA 650
 has been a member for 10 years
the only hard part is punching it out. I chipped my pin a little bit
madman360 is offline  
 




Posting Rules
Forum Jump