[TzeentchianGod]

Has anybody managed to swap out their Nemesis trigger? I can't seem to remove it from the frame.

[sofakingon]

I removed it and put a critical trigger in. I did have to sand down the pivot bolt substantially before it would fit on the bearings; but it was definately worth it. I'd reccomend getting the critical and if not the critical the techna or the CP Roller - But you'll have to either get a real intimidator trigger retainer screw/bolt or sand it down substantially.

www.seoulpaintball.com

[Dukemoney63]

before i sold my neme i wanted to take the trigger out to mess around with it a bit and i think i had to pull off the body...i don't remember but i never got...i think i did get pretty close, a friend of mine on my team was able to swap his out for a cp, his name is dernhumpus on pbn see if you can pm him or get in touch with him somehow...l8r enjoy the neme!

[TzeentchianGod]

In case anybody was following this story, my friend has to break apart the grip and re-weld it to get the trigger replaced. I'm still debating if it's worth it.

[Dukemoney63]

buy a nemesis2! that's worth it