Originally posted by pb_newbe
smasher - when u mean mill the cops path.....what do u do?
like u plug the holes thats it or what?
the holes for the cops rod are threaded, and plugged, and the holes that the air was diverted to are threaded and plugged.
the body is then drilled for a straight air path, similar to the original led and lcd, or the new fly.
Originally posted by mojojojoaf
Thanks for the info I had some of the same questions- although after reading the dialogue here I need to know what was meant by "for ir3-a4 the air passage conversions is plugging the diverter plate holes for the cops sensor and drilling a straight air path through the body."
Can we not leave it alone and just drill/mill for the eyes and mill the slot for the eye wires? Thanks guys in advance...
if you use the goo, then yes you can, but you would have to mill the the grip frame to run the wires from there, instead of the body.
I dont believe the e blade eye covers are long enough to go all the way down to the frame, as its close to not enough as it is.
this is why without the air apssage drilling an plugging, i will not offer eblade eye covers on the ire3, speed, or a4. the lcds you can mill a channel in the body for the eyes.