Sidewinder Leaking - PbNation
Find fields & stores near you!
Find fields and stores
Zipcode
PbNation News
PbNation News
Community Focus
Community Focus

 
Archived Thread - Cannot Edit  
Old 02-21-2002, 11:40 PM #1
dalai
 
 
Join Date: Jan 2002
Location: NYC
 has been a member for 10 years
Sidewinder Leaking

I've seen a few threads on this, but can't find any specific instructions.

I have air leaking out of the bleed hole in the reg. When I got the reg the 2 parts weren't very tight and I accidentally loosened the bottom half and then retightened...no problem right...WRONG.

So from everything I've seen, I must have a busted O-Ring, but now I can't separate the 2 halves. Off to Home Depot to get a cloth strap wrench to disassemble. Hopefully it is a broken O-ring, but if it is and I replace it how in the world do I put the reg back together without breaking another O-ring? Do I loctite the halves together when finished?

The reg has only about 300 rounds through it so I can't think of any other problems.

Any help would be appreciated!
dalai is offline  
Old Sponsored Links Remove Advertisement
Advertisement
Old 02-22-2002, 09:08 AM #2
Auctionjunkie!
PbN's G-Daddy
 
Auctionjunkie!'s Avatar
 
Join Date: Feb 2001
Location: Brownsburg, IN
Annual Supporting Member
Auctionjunkie! is a Mega Moderator
Auctionjunkie! is a Supporting Member
 has been a member for 10 years
Auctionjunkie! is BST Legit
Auctionjunkie! is a Paintball photographer
Auctionjunkie! is playing at Living Legends VII
Don't use Loc-tite on it, only hand tighten the parts. When you reassemble it make sure the brass piece is properly in place. put them together upside down to insure it doesn't slip. Put a dop of oil on the orings to help them seal. If you still have problems send it to AKA and they'll take care of it.

Dan
Auctionjunkie! is offline  
 




Posting Rules
Forum Jump