[minicocker7]

video please! how often anyone?

[Flesh Eater]

my question is, how much difference between the proto lpr and the gun you just did?

[almstevlboy]

ty for the detail and pics supplied........this stiky has saved me a few times, so thanks to all the guy's who take thier time to be so helpfull to idiots like me.......ty.......

[xpaintballer169x]

thanks alot

[i use conditioner]

what is this hex rod thing thats 10/32??? i have no idea wtf that thing is or looks like. oorrrr! where to screw it into.

[xpaintballer169x]

is there a thread on pbn that shows how to fine tune your lpr? if not could someone please help me out on this thread?

[enoryt]

can someone just answer the damn question?? EVERY WHEN DO YOU NEED TO L UBE THE LPR?

[FALLENX]

can any 1 tell me how to get the on/off under the barrel out? I already took my frame off and im having a hard time pulling it out.

[Bubu Kitty]

Ive heard once a year, but the guy who wrote this tread said everytime u use your gun. He said that because he said the place he gets his air from is dirty air!! never heard of that, but that is what he said. I dont know if anyone has ever though of this but dye ahs to ahve a support line. So if u ask teh company who made the gun how many time u should clean any! part of ur gun i would take thier advise over any person, but to be save clean ur gun every time u use it. Its a machine it always need matienance. At least we arnt all shootting carbines. CAS U CLEAN AND OIL THEM EVERY F'N TIME U USE THEM. THNK GOD FOR PBNATION.

[uber_spork (Banned)]

instead of using a 10/32 breech rod...(my friend told me this and it works! thanks simon)

if you have a skateboard, you take one of the four screws that hold the trucks down and screw that into the lpr and just pull it out with some pliers...you can use that instead of a breech rod


it works!!

[aaronu.]

thanks for this man

[frontmanballa]

o i might sound like a big nub but this is my first dye gun and i have no clue how to take the Lpr out of the Proto since it doesnt have the second back blate or w/e you want to call it so i need help bad, im a timmy person but im trying a proto so help please

[Havek]

Man thanks for the how to man. I cleaned out my LPR last night with out any problems.

[mr.guy (Banned)]

Originally Posted by DCI GUY

I just lubed my LPR with Slick Honey.

A tip:

If you don't have a breech rod, go to your local hardware store and buy a 2" screw with 10/32 threading. For $0.14 you can solve your LPR woes.

Also, you need to pull very hard to remove the LPR. I'm 6'2'', average guy and I had to pull to the point that I thought I was going to rip it out of the gun.

lol,this is odd.im..13 and 5'...i didnt have to pull very hard at all.

[phantomhitman]

this works for dm5s also I am assuming

[abracadabra1]

Originally Posted by mr.guy

lol,this is odd.im..13 and 5'...i didnt have to pull very hard at all.

you should not have to pull hard. the lpr can be easily removed by a 4-year-old.

[Flesh Eater]

it will vairy how hard you have to pull. you can use a cocking rod off an autococker to pull it out if you have one. it looks like the lpr is the same as the proto also. i would imagin that they use the same lpr for all their guns.

[mathw_09]

Just for everybody that was wondering about protos, this will work for the basic concept of lubing but the wires that you must remove from the board (a little bit harder) are different and the LPR is set in the front of the gun so the set screw is in a different spot.

[phantomhitman]

the lpr doesnt slide right out either. you have to put some force on it.

[right-behind-you]

My problem is, how much will this process vary if i'm taking the LPR out of a Proto?

[emortal4evr15]

if u do the bolt mods to a dm4, what should the lpr be set at... if i screw the lpr screw in all the way, how far should it be screwd out? same with the hpr... thanks

btw, nice man