Puttin on gadget grip - PbNation
Find fields & stores near you!
Find fields and stores
Zipcode
PbNation News
PbNation News
Community Focus
Community Focus

 
Archived Thread - Cannot Edit  
Old 06-11-2001, 01:12 PM #1
5pecial J
throwin' bows
 
5pecial J's Avatar
 
Join Date: May 2001
Location: Pittsburgh, PA
 has been a member for 10 years
Puttin on gadget grip

I don't have an impulse(yet), but i was wondering how you would put on a gadget grip with that hose that comes with an Impulse. It looks like there is a straight fitting going into the gun, and a 90 degree fitting going into the max-flo. Would you need to buy another 90 degree fitting to fit into the gadget grip??? thanks if you answer my question.
__________________
SMBWhAt!?!?
Representin' Morgantown
5pecial J is offline  
Old Sponsored Links Remove Advertisement
Advertisement
Old 06-11-2001, 04:22 PM #2
Bocephus
Impulse #2948
 
Bocephus's Avatar
 
Join Date: Apr 2001
Location: OH
 has been a member for 10 years
If you absolutely have to you can use the straight elbow on the gaget grip. Depending on where you bought your gaget grip from you will most likely have to buy another 90 elbow. Other than that your set.

-Bocephus
__________________
--My Stuff--
-Impulse #2948
-Acid Blue Wash Phantom
-Picture
Bocephus is offline  
Old 06-11-2001, 06:54 PM #3
5pecial J
throwin' bows
 
5pecial J's Avatar
 
Join Date: May 2001
Location: Pittsburgh, PA
 has been a member for 10 years
<--- Kicks self in head!

Ohhh yea.....(duh) sorry that was a newbish question.. as a matter of fact I did the same thing with my cocker.. there was a straight macroline fitting that i screwed into a normal 90 degree elbow and then into my reg. I didn't even think of that again!
Thanks!
__________________
SMBWhAt!?!?
Representin' Morgantown
5pecial J is offline  
Old 06-16-2001, 04:46 AM #4
fom
**** EXPERT ****
 
fom's Avatar
 
Join Date: Jun 2001
fom is a Supporting Member
 has been a member for 10 years
If you are talking about the Smart Parts gas thru gagit grip, it has the gas tap half way up the grip. This requires a 90* fitting (and you normaly have a 90* on the reg.)

If you order the grip with the gun, it would be installed for you and you would not have to worry about fittings. By the way, that is NOT a Macro line fitting-- it a "Shocker line" fitting (bigger)

Personaly i prefur a stright gas thru grip like the Kapp. this as the gas tap on the bottom so it dosn''t interfer with your fingers. they are advaible in black and chrome and several colors.

If you are looking to things to get with your gun, you should consider a trigger job-- again best bought at the time you buy the gun
__________________
www.ratpb.com

tired of spam?
http://www.cloudmark.com/spamnetsig/

Tired of telemarketers?
http://www.donotcall.gov
fom is offline  
Old 06-16-2001, 12:41 PM #5
Exilict
 
 
Join Date: Apr 2001
Location: Beaver Falls, PA
Exilict is a Supporting Member
Exilict is a founding member
Exilict donated to help Peyton Trent
Exilict plays in the APPA D5 division
If you dont like the hose there, you could allways take out one of the plugs in either hte front or the back, run a 90 there, then put that plug in your grip.
Exilict is offline  
Old 06-16-2001, 06:39 PM #6
fom
**** EXPERT ****
 
fom's Avatar
 
Join Date: Jun 2001
fom is a Supporting Member
 has been a member for 10 years
This is true--but the Anti honk device (a flow restrictor) is in the vertical adapter. by avoiding the vertical adapter, you would want to put one in your new 90*-- not a big deal, but something you have to remember to do.
__________________
www.ratpb.com

tired of spam?
http://www.cloudmark.com/spamnetsig/

Tired of telemarketers?
http://www.donotcall.gov
fom is offline  
 




Posting Rules
Forum Jump