Here is a post showing where you can find all the mods for the tes or the one. I think this is needed.
If you look thro there is a link to bodgers switch mod turtorial... and a post how 2 make the zentitram trigger 2 fit... and there is also another post on a lpr mod for the one.
many mods included(for the one)
Fer those that dont rly wanna do a complex trigger mod...
if it works it works
If you havent got to it by the first link...
Here look here at a custom lpr uses a Palmers STB Mini-Reg ...
Magnet mod... reduce bounce
Similar to the magnet mod to get rid of bounce
If you are looking into appearance changes
Painting the grips another color...
painting grips mod
Rubber grips, Pics and detailed description
Custom rubber grips.. there is another post on this with pics
Here is a pic of some rubber grips... looks kool.
rubber grips pic.
Heres another way to rubberize ur crappy stock grips.
another spring mod with the zenitram trigger....
If you are having trouble with the eye sensing the bolt look here (not tested yet)
eye sensitivity mod
Cosmetic mod for the T1 lighting an led every time the solenoid fires.
T1 Trigger LED
Get more fps with same dwell and psi settings.
T1 Main Spring Mod
They finally found a way to get a QEV on T1
QEV on T1
Finally som1 has modded the ASA so you can use any Regulator.
Stock ASA mod
TES Manual & rechargeable battery mod
Here is the mod for the board jumper to unlock the modes.
board jumper mod (only mod not from this site)
Nice mod to move your trigger frame forward for the T1
Move Frame mod
Yet another... makes your stock reg better.