[Hi-tech Lou]

Does anybody know where I can get some those little o-rings that are on the plunger in the solenoid.

[stormtrooper1015]

I've looked, but haven't been able to source them out. I talked to Smart Parts, who use a "similar" solenoid in the Impulse. They will only sell the spool with o'rings installed. They feel that the o'rings are so small, they are easily damaged if attempts are made to install them on the spool by yourself.

It's a Skinner valve, and is made in Japan if that helps any... If you have any luck in your search let me know, as I'd buy a bunch.

Cheers.

[Larry]

Cant you buy Bushy Solenoids Orings?

If so they fit

[me262]

well i know icd said they cant get them, SP sells the spools supposedly (havnt got back to me)

but i out of curiosity called a place here that deals with skinner stuff, he said you cant get just the o-rings he doesnt think but there is a repair kit that has the o-rings, gaskets for the ends, and the small bypass button and little tiny square piece of metal that fits in the bypas button.

he getting more info for me tomarrow on price and whatnot

[stormtrooper1015]

Hey ME262... any luck with a price on that repair kit for the Skinner solenoid? And on a different note, were you able to figure out a price for the replacement delrin valve dampher?

Thanx - Mike.

[me262]

nope, eveyone says they dont make them, you have to buy a new valve

after hearing that i decided to call a company that will custom make o-rings, i sent them some samples and they said no problem, how many do i want so im saving the money to get them made, i have to have 1000 made so i wont have a shortage for awhile, problem is its costing handsomly, but it will add up to being cheaper then buying new valves for a stupid little o-ring


oops, dampners are $5

[stormtrooper1015]

Sweet...

Well, I'll snag a bunch of solenoid rings off ya once they are made. And with respect to the dampners, how would you like me to order them?

Thanx

[Kansas Kaos]

Let me know when you get those o-rings coming in..... I want a BUNCH!!!
Also, FYI for everyone putting on a plunger dampner (the one between hammer & ram housing).... do NOT make your dampner too thick. A thick dampner will not allow the plunger assembly to return all the way back and seal. The result is a small continuos leak....... so be carefull!!

[PATHOO]

Hey le Frontman arrete de niaiser et achete toi un selenoid d'IMPULSE ; L'cheap !!!!!!!!




__________________________________________________ _
Let me kick some but with my ANGEL and run to the FLAG !!!!!

Ce message te provient d'un Backman anonyme.

[warpedmephisto]

Pathoo, what is that about people buying Impulse solenoids cheap off of the Frontman? (www.freetranslations.com)

[MaD]

What was the part # for the whole Skinner valve ?

[PrettyPistol]

What does the dampner between the hammer and ram housing do?

[Matt H]

It can cause your body to screw up like mine did and still is. The bolt pin will hammer on the back of the pin slot causeing it to bend down into your bolt tube. Then your bolt gets scared and it wont move as fast if it moves at all. Just be safe and put a o-ring in/on it.

[Have Blue]

MaD, the complete valve is a Skinner K4H01.

[Frostball]

Hey!! me262, I really need some solenoid's plunger o-rings. Let me know your price. Thanks!

[Frostball]

I think Pathoo had right, the Impulse solenoid plunger is exactly the same as the tribal solenoid plunger. But I'm not sure for the spool voltage.

[warpedmephisto]

One of the spool o-rings blew apart in mine, so I asked me262 to test fit one of the SP guns' spool and he said it fit perfectly, so I ordered one from SP (bastards charged me $18 for it and I think it was used ) But anyways I have a SP spool in my solenoid and it works perfect.