Find fields & stores near you!
Find fields and stores
Zipcode
PbNation News
PbNation News
Community Focus
Community Focus

Reply
 
Thread Tools
Old 07-23-2014, 04:10 PM #1
backman105
 
 
backman105's Avatar
 
Join Date: Nov 2007
Location: Fort mill
Pm8 board question

My boot up sequence is yellow then goes to red.
Haven't checked to see if it's the battery or not. Idk if it's the stock board either because I haven't taken the grips off. Everywhere I've checked says the boot up should be blue.
backman105 is offline   Reply With Quote
Old Sponsored Links Remove Advertisement
Advertisement
Old 07-23-2014, 05:56 PM #2
backman105
 
 
backman105's Avatar
 
Join Date: Nov 2007
Location: Fort mill
Turns out it's a virtue board��
backman105 is offline   Reply With Quote
Old 07-24-2014, 02:45 AM #3
AlmightyRuler
Vigilante English Teacher
 
AlmightyRuler's Avatar
 
Join Date: Feb 2007
Location: The Land of Confusion.
Virtue boards don't have a true boot sequence. Once it's on it should be ready to go. When your LED turns yellow upon start-up your battery is low & needs to be replaced. A red flash means failure is imminent.

If your breech is empty the LED will either be solid or flickering red. This depends on your software. Eyes blocked will either be solid or flickering blue depending on your software.
__________________
Some Invaluable Words of Wisdom:
A wise man's heart directs him toward the right, but the foolish man's heart directs him toward the left.
-Ecclesiastes 10:2
“If you're not a liberal at twenty you have no heart; if you're not a conservative at forty you have no brain.”
-Sir Winston Churchill
"Lousy Democrats."-Homer J. Simpson
AlmightyRuler is offline   Reply With Quote
Reply


Thread Tools

Posting Rules
Forum Jump