Originally Posted by Bigmike627
I played with my soft shot bolt today for the first time and noticed some serious shoot down as well as FSDO. I do not have the 5.20 board update yet, but was wondering if there is any way to fix this issue.
The board update will do nothing to resolve this issue and a dwell of 13 is insanely high. You have too much friction in your engine ... without being able to see it it will be impossible for any of us to tell you what the issue is.
I would suspect ether it needs more lubrication on the sail and shutoff o-rings, or the shutoff is not seated properly in the front of the can within that 2x20. I would also check to make sure the flapper o-ring is correctly installed. if all of those check out, then I would check/change the 010 O-ring in the back of the shutoff and replace it with ether a Urethane 010 or the 1.9x5.8 mm D70.