Find fields & stores near you!
Find fields and stores
Zipcode
PbNation News
PbNation News
Community Focus
Community Focus

Reply
 
Thread Tools
Old 07-11-2014, 02:17 PM #1
PBGriff
 
 
PBGriff's Avatar
 
Join Date: Jun 2014
Location: North of Chicago
Azodin Blitz Just got it in! Some ?'s

Stoked to have gotten all my gear in.

I bought a all black Azodin blitz electronic marker. 48/3000 Ninja tank. Went cheap on a JT agitator style hopper. GI 3 star Paintballs

I went to H2 Paintball my local store/field and had them fill up my tank.

The directions with the Azodin aren't awesome, but they are a little helpful. I learned that I needed to take my grip off and install the 9v battery. Piece of cake.

I read somewhat of the light indicators.

Got to shooting. Went thru about 40 balls in normal green mode. Then went to orange and ramped it up, got thru 20 balls and then chop city. Lights started blinking on the gun so I took the barrell off and cleaned up. After I reinstalled...

The gun no longer shoots. If I pull back the bolt and try and fire it barely does anything and a ball gets stuck everytime. My tank shows that it has at least 2000 left in it.

1. What is going on with the gun?
2. Is there a way to turn off the gun completely without having to remove the battery every time?
3. I noticed trying to unscrew the tank is SUPER difficult. Any tricks of the trade for a noob?
4. This feeder I feel like sucks. It just clamps the hopper on?

Thank you TONS in advance.
__________________
__Mr__PBGriff
Azodin Blitz
Budget Baller
PBGriff is offline   Reply With Quote
Old Sponsored Links Remove Advertisement
Advertisement
Old 07-11-2014, 02:23 PM #2
Grapher400
No flex zone!
 
Grapher400's Avatar
 
Join Date: Mar 2014
Location: West Chester PA
cheek your eyes, thts the big problem with the blitz, you have to make sure the eyes are on and clean, should be in the manual, if not the simple way to stop the chopping is make sure the eyes are on and get a faster hopper, like a hole or scion. to clean the eyes, take out the bolt and put a squeegee through it
__________________
speedball setup: DLX LUXE 1.5, Virtue Spire, Low Pressure Regulator on a crossfire bottle 68/4500
Instagram-Americanpaintball
Grapher400 is offline   Reply With Quote
Old 07-11-2014, 02:48 PM #3
PBGriff
 
 
PBGriff's Avatar
 
Join Date: Jun 2014
Location: North of Chicago
I took the bolt out and cleaned it. Put everything back together and it still won't shoot. Super frustrating so far.

Bottom light is green, top light flashes green.

I can get top light to orange and gottom light green and it attempts to shoot once and nothing happens.
__________________
__Mr__PBGriff
Azodin Blitz
Budget Baller
PBGriff is offline   Reply With Quote
Old 07-11-2014, 03:29 PM #4
PBGriff
 
 
PBGriff's Avatar
 
Join Date: Jun 2014
Location: North of Chicago
Ok I have it shooting steadily. Just if I have the eyes on and try and rapid shoot ball breaks and gun won't fire. Even with eyes off. Makes sense.

Sensitive eyes...
__________________
__Mr__PBGriff
Azodin Blitz
Budget Baller
PBGriff is offline   Reply With Quote
Old 07-11-2014, 04:58 PM #5
MooseViking
 
 
Join Date: Mar 2014
your hopper may not be set to feed fast enough for your rate of fire.

you turn off the board by holding the top button until it shuts off.
MooseViking is offline   Reply With Quote
Old 07-11-2014, 09:05 PM #6
smalltownkaos
Azodin Fan
 
smalltownkaos's Avatar
 
Join Date: Jan 2013
Location: Chester Gap VA
smalltownkaos has achieved Level 1 in PbNation Pursuit
smalltownkaos has achieved Level 2 in PbNation Pursuit
smalltownkaos has achieved Level 3 in PbNation Pursuit
Btw orange is not a mode. Orange is eyes off. Modes lower led and are green, dark blue, purple, light blue and flashing green(programming).

upper led red(safe), green (eyes on) orange, flash red(battery) and flash green is eyes problem
__________________
Azodin: Green Kaos...Blue ZII...
Green and Silver KDII
Green and Purple Blitz Evo
Capt. American Blitz Evo
w/ matching zero
DP: Green G4...Green F8
smalltownkaos is offline   Reply With Quote
Old 07-11-2014, 09:06 PM #7
smalltownkaos
Azodin Fan
 
smalltownkaos's Avatar
 
Join Date: Jan 2013
Location: Chester Gap VA
smalltownkaos has achieved Level 1 in PbNation Pursuit
smalltownkaos has achieved Level 2 in PbNation Pursuit
smalltownkaos has achieved Level 3 in PbNation Pursuit
Sounds like you had your eyes off, would explain the chopping
__________________
Azodin: Green Kaos...Blue ZII...
Green and Silver KDII
Green and Purple Blitz Evo
Capt. American Blitz Evo
w/ matching zero
DP: Green G4...Green F8
smalltownkaos is offline   Reply With Quote
Old 07-11-2014, 10:52 PM #8
Grapher400
No flex zone!
 
Grapher400's Avatar
 
Join Date: Mar 2014
Location: West Chester PA
i haven't had a kaos in forever so i forgot the modes
__________________
speedball setup: DLX LUXE 1.5, Virtue Spire, Low Pressure Regulator on a crossfire bottle 68/4500
Instagram-Americanpaintball
Grapher400 is offline   Reply With Quote
Old 07-12-2014, 01:57 PM #9
PBGriff
 
 
PBGriff's Avatar
 
Join Date: Jun 2014
Location: North of Chicago
Is there a guide that tells you how to get to other modes. ..I can't get the lights to change... only red orange or green.
__________________
__Mr__PBGriff
Azodin Blitz
Budget Baller
PBGriff is offline   Reply With Quote
Old 07-12-2014, 02:09 PM #10
CA_Tectonics
 
 
CA_Tectonics's Avatar
 
Join Date: Feb 2010
Location: Northern CA
http://www.azodin.com/Support/MANUAL...Z11_MANUAL.pdf
__________________
Graphite Dangerous Power REV-I
TechT bolt engine, REV-I & Disruptive barrel kits, Prophecy V2 w/ Empire feedgate, Crossfire SS 68/4500
Maroon and Polished Aluminum Dangerous Power Threshold
7th Element board, TechT bolt engine, magnet trigger kit, REV-I PMD, Sly Dual Carbon barrel kit, Prophecy V2, Crossfire SS 68/4500
Black and Silver Dangerous Power F8
APE Rampage board, VS bolt, magnet trigger kit, F8 gauge, REDZ barrel kit, Halo B w/ Exalt feedgate, PMI 68/4500
Polished Aluminum and Red Dangerous Power F8
Virtue board, VS bolt, magnet trigger kit, Halo B w/ Exalt feedgate, PMI 68/4500
CA_Tectonics is offline   Reply With Quote
Old 07-12-2014, 02:10 PM #11
CA_Tectonics
 
 
CA_Tectonics's Avatar
 
Join Date: Feb 2010
Location: Northern CA
Don't know what one you have so......http://www.azodin.com/Support/MANUAL...EVO_MANUAL.pdf
__________________
Graphite Dangerous Power REV-I
TechT bolt engine, REV-I & Disruptive barrel kits, Prophecy V2 w/ Empire feedgate, Crossfire SS 68/4500
Maroon and Polished Aluminum Dangerous Power Threshold
7th Element board, TechT bolt engine, magnet trigger kit, REV-I PMD, Sly Dual Carbon barrel kit, Prophecy V2, Crossfire SS 68/4500
Black and Silver Dangerous Power F8
APE Rampage board, VS bolt, magnet trigger kit, F8 gauge, REDZ barrel kit, Halo B w/ Exalt feedgate, PMI 68/4500
Polished Aluminum and Red Dangerous Power F8
Virtue board, VS bolt, magnet trigger kit, Halo B w/ Exalt feedgate, PMI 68/4500
CA_Tectonics is offline   Reply With Quote
Old 07-12-2014, 02:27 PM #12
PBGriff
 
 
PBGriff's Avatar
 
Join Date: Jun 2014
Location: North of Chicago
Yeah I have that but when I follow zenith board instructions, holding buttons down, nothing happens
__________________
__Mr__PBGriff
Azodin Blitz
Budget Baller
PBGriff is offline   Reply With Quote
Old 07-12-2014, 02:31 PM #13
CA_Tectonics
 
 
CA_Tectonics's Avatar
 
Join Date: Feb 2010
Location: Northern CA
Hmmmmmmm. I wish I had it right in front of me.
__________________
Graphite Dangerous Power REV-I
TechT bolt engine, REV-I & Disruptive barrel kits, Prophecy V2 w/ Empire feedgate, Crossfire SS 68/4500
Maroon and Polished Aluminum Dangerous Power Threshold
7th Element board, TechT bolt engine, magnet trigger kit, REV-I PMD, Sly Dual Carbon barrel kit, Prophecy V2, Crossfire SS 68/4500
Black and Silver Dangerous Power F8
APE Rampage board, VS bolt, magnet trigger kit, F8 gauge, REDZ barrel kit, Halo B w/ Exalt feedgate, PMI 68/4500
Polished Aluminum and Red Dangerous Power F8
Virtue board, VS bolt, magnet trigger kit, Halo B w/ Exalt feedgate, PMI 68/4500
CA_Tectonics is offline   Reply With Quote
Old 07-12-2014, 02:39 PM #14
CA_Tectonics
 
 
CA_Tectonics's Avatar
 
Join Date: Feb 2010
Location: Northern CA
Looking through the manual real quick - is there a red jumper clip installed on the board?
__________________
Graphite Dangerous Power REV-I
TechT bolt engine, REV-I & Disruptive barrel kits, Prophecy V2 w/ Empire feedgate, Crossfire SS 68/4500
Maroon and Polished Aluminum Dangerous Power Threshold
7th Element board, TechT bolt engine, magnet trigger kit, REV-I PMD, Sly Dual Carbon barrel kit, Prophecy V2, Crossfire SS 68/4500
Black and Silver Dangerous Power F8
APE Rampage board, VS bolt, magnet trigger kit, F8 gauge, REDZ barrel kit, Halo B w/ Exalt feedgate, PMI 68/4500
Polished Aluminum and Red Dangerous Power F8
Virtue board, VS bolt, magnet trigger kit, Halo B w/ Exalt feedgate, PMI 68/4500
CA_Tectonics is offline   Reply With Quote
Old 07-12-2014, 08:25 PM #15
iPaintSlinger
Front Line
 
Join Date: Feb 2014
Quote:
Originally Posted by CA_Tectonics View Post
Hmmmmmmm. I wish I had it right in front of me.
You don't know how many times I just want to say ship me your marker and i'll fix it. As descriptive as we are when explaining fixes, at times it doesn't seem to be enough to get the job done.

Not doughting any of PBGriff's skills but sometimes you just say to yourself " I know that I can fix this". I personally can't solve this one because I have never used this marker but I am sure that it would be soething that I can solve with a day or so of use.

iPS
__________________
May your trigger finger be as fast as your mind.
May your reflexes be as fast as your thoughts.
May your team communication be as strong as your hunger to win.
iPaintSlinger is offline   Reply With Quote
Old 07-12-2014, 09:47 PM #16
smalltownkaos
Azodin Fan
 
smalltownkaos's Avatar
 
Join Date: Jan 2013
Location: Chester Gap VA
smalltownkaos has achieved Level 1 in PbNation Pursuit
smalltownkaos has achieved Level 2 in PbNation Pursuit
smalltownkaos has achieved Level 3 in PbNation Pursuit
Sounds like the tourney lock like CA said.
__________________
Azodin: Green Kaos...Blue ZII...
Green and Silver KDII
Green and Purple Blitz Evo
Capt. American Blitz Evo
w/ matching zero
DP: Green G4...Green F8
smalltownkaos is offline   Reply With Quote
Old 07-13-2014, 01:44 AM #17
PBGriff
 
 
PBGriff's Avatar
 
Join Date: Jun 2014
Location: North of Chicago
Thanks for the responses. I'll have sometime tomorrow evening to take the gun apart and have a look. This is my FIRST paintball gun in 10 years, but I'm handy with tools.

I'll keep you posted and thanks for the help!
__________________
__Mr__PBGriff
Azodin Blitz
Budget Baller
PBGriff is offline   Reply With Quote
Old 07-13-2014, 01:59 AM #18
CA_Tectonics
 
 
CA_Tectonics's Avatar
 
Join Date: Feb 2010
Location: Northern CA
Yup. No problem. Good luck .
__________________
Graphite Dangerous Power REV-I
TechT bolt engine, REV-I & Disruptive barrel kits, Prophecy V2 w/ Empire feedgate, Crossfire SS 68/4500
Maroon and Polished Aluminum Dangerous Power Threshold
7th Element board, TechT bolt engine, magnet trigger kit, REV-I PMD, Sly Dual Carbon barrel kit, Prophecy V2, Crossfire SS 68/4500
Black and Silver Dangerous Power F8
APE Rampage board, VS bolt, magnet trigger kit, F8 gauge, REDZ barrel kit, Halo B w/ Exalt feedgate, PMI 68/4500
Polished Aluminum and Red Dangerous Power F8
Virtue board, VS bolt, magnet trigger kit, Halo B w/ Exalt feedgate, PMI 68/4500
CA_Tectonics is offline   Reply With Quote
Old 07-22-2014, 10:03 PM #19
PBGriff
 
 
PBGriff's Avatar
 
Join Date: Jun 2014
Location: North of Chicago
Been using my blitz more and really got the hang of it. Its pretty badass!! I'm going to go take pics and start a thread here with a mini review. I'm going to use it on the field this saturday and will follow with another review. I'm pretty happy with the gun! Thanks Azodin!
__________________
__Mr__PBGriff
Azodin Blitz
Budget Baller
PBGriff is offline   Reply With Quote
Old 07-22-2014, 11:12 PM #20
CA_Tectonics
 
 
CA_Tectonics's Avatar
 
Join Date: Feb 2010
Location: Northern CA
So......did you manage to figure out how to program the board?
__________________
Graphite Dangerous Power REV-I
TechT bolt engine, REV-I & Disruptive barrel kits, Prophecy V2 w/ Empire feedgate, Crossfire SS 68/4500
Maroon and Polished Aluminum Dangerous Power Threshold
7th Element board, TechT bolt engine, magnet trigger kit, REV-I PMD, Sly Dual Carbon barrel kit, Prophecy V2, Crossfire SS 68/4500
Black and Silver Dangerous Power F8
APE Rampage board, VS bolt, magnet trigger kit, F8 gauge, REDZ barrel kit, Halo B w/ Exalt feedgate, PMI 68/4500
Polished Aluminum and Red Dangerous Power F8
Virtue board, VS bolt, magnet trigger kit, Halo B w/ Exalt feedgate, PMI 68/4500
CA_Tectonics is offline   Reply With Quote
Old 07-23-2014, 12:39 AM #21
PBGriff
 
 
PBGriff's Avatar
 
Join Date: Jun 2014
Location: North of Chicago
YESSSSS. The links above helped a ton, as well as their being something unplugged inside the gun. Could of been from the factory or I could of done it when installing the battery so I left it out of my review.

Paintball is a blast.

I hate my hopper.
__________________
__Mr__PBGriff
Azodin Blitz
Budget Baller
PBGriff is offline   Reply With Quote
Reply


Thread Tools

Posting Rules
Forum Jump