Hah, thanks guys! If anyone wants to know, the grip is a stock frame with removed trigger guard and a new trigger frame machined and welded on, the whole grip was sanded to bare metal and sprayed with engine paint and baked in a cheap toaster oven. Then I machined the trigger and drilled and tapped all holes in it. Then I epoxied the 1/4" magnet into the grip to repel the trigger magnet just like stock axe. The gun has a lurker bolt and shoots 285 +/-5 fps at 160 psi. I also have an Ape board for full auto on first trigger pull. The mag covering the grip is cut out for redline grip and this is why there is an ugly gap. The metal shroud on the front is ATI AR15 shroud that is slid onto the EMC kit after I ground off the ribs on the picatinny rails. The shroud fits emc perfectly, with all 6 sides of EMC touching the shroud. I can also mount buttstock tank on this and have an adapter to use zetamags p90 style. The barrel in the pic is a demo from PB Extravaganza, I normally use dye CF boomstick 688.