First time DM owner here. I received the gun via mail, everything sounded good, there was a leak in the macro line but fixed that real quick and a slight hiss from the inside. Upon opening the gun my problem is under my LPR when I air the gun up disconnected from the grip, it leaks air through the largest hole under the LPR. This is a threaded hole, but it's empty. So starting from the back of the gun it goes my LPR screw that holds it in place, the hole that is leaking air and then the two adjustment screws that follow. Anyone have any idea of a fix? I've replaced the orings on the LPR, Bolt and Flow Plug. What I havent touched is the solenoid at all.
If it comes from the small hole under the LPR, you need to remove your LPR.
The cause of the leak is either one of the #015 o-rings on the outside of the LPR or the
#006 o-ring found inside the LPR (see page 10).
When you move the lpr, in the same hole can u see the lpr body? From what it looks like you need a m4-m5 setscrew.. take the body to hardware store and get one forget I've seen so many different guns this week..