Find fields & stores near you!
Find fields and stores
Zipcode
PbNation News
PbNation News
Community Focus
Community Focus

Reply
 
Thread Tools
Old 03-25-2014, 01:15 PM #1
IanBritN57
 
 
IanBritN57's Avatar
 
Join Date: Feb 2014
Crossover wont shoot in electronic mode

I just got it on sunday (used) and nothing was wrong and it was working, i cleaned it up, and i dont know if i put something in wrong but when i air the gun up it will work in mech but when i try to use electro it just clicks, tried eyes on/off and still does it, replaced battery with no change, any help would be great, also the pin that holds the lever in is missing so maybe thats it? I just ordered the pin yesterday, if anyone knows the reason for it any help would be great, thanks!
IanBritN57 is offline   Reply With Quote
Old Sponsored Links Remove Advertisement
Advertisement
Old 03-25-2014, 04:57 PM #2
Jambousa
 
 
Jambousa's Avatar
 
Join Date: Dec 2012
Location: Maryland
Jambousa has achieved Level 1 in PbNation Pursuit
Jambousa has achieved Level 2 in PbNation Pursuit
Jambousa supports Empire
Pin that holds the lever in? If you mean the silver pin on the fire selector then yes that will stop it.
__________________
Evolution Legion Paintball
Jambousa is offline   Reply With Quote
Old 03-25-2014, 07:59 PM #3
IanBritN57
 
 
IanBritN57's Avatar
 
Join Date: Feb 2014
Quote:
Originally Posted by Jambousa View Post
Pin that holds the lever in? If you mean the silver pin on the fire selector then yes that will stop it.
no not that, ill check what part number it is later
IanBritN57 is offline   Reply With Quote
Old 03-25-2014, 09:00 PM #4
I feel purple
 
 
Join Date: Apr 2012
break the bolt down to the valve. clean it. lube it. if the valve is dry, the gun will not fire. instead, you will get the clickity clicks that you speak of.
I feel purple is offline   Reply With Quote
Old 03-25-2014, 09:01 PM #5
IanBritN57
 
 
IanBritN57's Avatar
 
Join Date: Feb 2014
Quote:
Originally Posted by I feel purple View Post
break the bolt down to the valve. clean it. lube it. if the valve is dry, the gun will not fire. instead, you will get the clickity clicks that you speak of.
it shoots in mech mode though
IanBritN57 is offline   Reply With Quote
Old 03-25-2014, 09:02 PM #6
I feel purple
 
 
Join Date: Apr 2012
there is a youtube video that goes over the bolt maintenance. follow this exactly and your crossover will shoot flawlessly.
v=wEDDMu6nvq8https://www.youtube.com/watch?v=wEDDMu6nvq8
I feel purple is offline   Reply With Quote
Old 03-25-2014, 09:03 PM #7
I feel purple
 
 
Join Date: Apr 2012
yes, it will shoot in mech because the mechanical forces are more strenuous on the bolt and therefore making it work.
I feel purple is offline   Reply With Quote
Old 03-25-2014, 09:41 PM #8
IanBritN57
 
 
IanBritN57's Avatar
 
Join Date: Feb 2014
Quote:
Originally Posted by I feel purple View Post
there is a youtube video that goes over the bolt maintenance. follow this exactly and your crossover will shoot flawlessly. v=wEDDMu6nvq8https://www.youtube.com/watch?v=wEDDMu6nvq8
thanks, i just did that so when i get some air ill try it out
IanBritN57 is offline   Reply With Quote
Old 03-25-2014, 10:09 PM #9
Jay2014
 
 
Jay2014's Avatar
 
Join Date: Jan 2014
Try it with no air and the battery in. Turn it on electro mode, turn the eyes off and see if it trips the solenoid according to the program. (Whatever you have it set to, 3 shot safety full auto by default) if that works fine, your battery is good.

Then try the same thing with air. If it does not fire your battery may have a bad connection. Then you could try wedging a small piece of cardboard under the battery the side opposite the contacts where the regulator screws are... to force it against the contacts and hold it tight. I have had this issue with both my V1 Crossovers and I bent the battery contacts on the board down to fix it without the cardboard ghetto mod.
Jay2014 is offline   Reply With Quote
Old 03-25-2014, 10:18 PM #10
IanBritN57
 
 
IanBritN57's Avatar
 
Join Date: Feb 2014
It trips the solenoid and im pretty sure it has good connection because the battery is pretty tight
IanBritN57 is offline   Reply With Quote
Old 03-25-2014, 10:21 PM #11
IanBritN57
 
 
IanBritN57's Avatar
 
Join Date: Feb 2014
And its in safety full auto
IanBritN57 is offline   Reply With Quote
Old 03-26-2014, 09:49 AM #12
Jay2014
 
 
Jay2014's Avatar
 
Join Date: Jan 2014
Post up what part you are missing ( pin?) that's probably what's wrong. Most of the parts aren't optional. (Edit for typo)
Jay2014 is offline   Reply With Quote
Old 03-26-2014, 10:06 AM #13
IanBritN57
 
 
IanBritN57's Avatar
 
Join Date: Feb 2014
I tried lubing it up with no help btw its part # 19 from the schematic
IanBritN57 is offline   Reply With Quote
Old 03-26-2014, 11:35 AM #14
Jay2014
 
 
Jay2014's Avatar
 
Join Date: Jan 2014
#19 would be your trigger pivot pin. If you are referring to the one that actually holds the trigger assembly on the frame, that prevent it from firing in electronic mode. In mechanical mode the trigger manually trips the sear which would explain the problem.

You may be able to use one of the grip frame pins temporarily or make one out of a finishing nail until they send it to you.
Jay2014 is offline   Reply With Quote
Old 03-26-2014, 11:52 AM #15
IanBritN57
 
 
IanBritN57's Avatar
 
Join Date: Feb 2014
I put a piece of a paperclip in there and it didnt work, maybe cuz it was too small?
IanBritN57 is offline   Reply With Quote
Old 03-26-2014, 09:16 PM #16
Jay2014
 
 
Jay2014's Avatar
 
Join Date: Jan 2014
Quote:
Originally Posted by IanBritN57 View Post
I put a piece of a paperclip in there and it didnt work, maybe cuz it was too small?
Maybe, you will have to narrow it down by eliminating what it isn't. It sounds like the pin from what you are saying. Hopefully if you can't swap one to check it, your new one will arrive soon.
Jay2014 is offline   Reply With Quote
Old 03-26-2014, 09:31 PM #17
IanBritN57
 
 
IanBritN57's Avatar
 
Join Date: Feb 2014
Quote:
Originally Posted by Jay2014 View Post
Maybe, you will have to narrow it down by eliminating what it isn't. It sounds like the pin from what you are saying. Hopefully if you can't swap one to check it, your new one will arrive soon.
yeah true
IanBritN57 is offline   Reply With Quote
Old 04-02-2014, 08:20 AM #18
IanBritN57
 
 
IanBritN57's Avatar
 
Join Date: Feb 2014
Its fixed, was the pin lol. Also got the trigger upgrade which feels nicer
IanBritN57 is offline   Reply With Quote
Reply


Thread Tools

Posting Rules
Forum Jump