How do i put an eblade together in parts? I had to buy seperate parts since some were not working but have no idea how it goes back together. Pictures would help alot. I tried the manual but not much help. Thanks!
Is the solenoid a fully enclosed one with two screws on the side, or is it open on the bottom? The sear solenoid just slips into the slot for it, and has a piece that fills in the space between the top of the clapper noid and top edge of the frame, which I believe is held in by a screw that sits to the right of the clapper. Hammer just slips in through the back of the bottom tube and is adjusted by sticking an allen wrench(same size allen as the grip frame I believe) and turned clockwise to lower it. Planet eclipse has the eblade manuals online for viewing which explains how to set the lug height for the hammer and time it properly.
Thanks guys! im getting there. The manual dosnt really have much pics of the top of the frame which is where im struggling. I have the solenoid cap on, I dont know which way the hammer goes in though. Thanks for your patience guys, I know these are pretty basic questions.
the flat side of the hammer goes into the tube first, the grove end will be what you see when you are looking from the back. if you need pics of the frame from the top view pm and i can take some for you.