NT11 noid leak or something else?
hmmm first leak ever....
soo my gun had sit for id say about a month. i had some put the tank on and bam leak from what appears to be the noid. donno if its the noid gaskets (the very tiny oring that btw do not come in the medium maint kit or the color dye/proto oring kit...)
how do you know 100% sure its the orings or not.
also should u have lube on the tiny orings under the noid? or put them in dry?
i bought some replacment ones not seeming to help.
last time i used to gun was in 20-25 degree weather. worked ok (lot of bolt stick from what i assume was the cold weather. i had cleaned and relubed since then too. but yesterday was the first time i put air on it. if it is not the noid what could it be?
i even too off the frame and gased it up to see where its coming from and im fairly certain its the noid (noid it self or the tiny manifold gasket/oring under the noid)
and input is great folks.
to sum it questions are
how do you know if its the noid or the oring/gasket?
2. do you lube the orings/gaskets under the noid? or does it need to be dry?
3. if its not the noid what could it be?
this is the first issue ive ever had. i try to take stupid over protective care of my gear and guns.
and im stumped.
"Bad News and Good News, Bad News is were all going to die! Good news is There is No More Bad News!" Cpl Graebner, Clinton R USMC