Originally Posted by aresfiend
The stock 7th Element solenoid is NOT rated for the higher operating pressure.
How you can fix this (how I did, anyway) is to pull the solenoid off the stock board and put it on the new one. It fixed my consistency issues (until I had to service my reg).
Lol... Where in the world do you get your information? The 7th element board functions fine with the Epiphany. Not to mention I run my epiphany without the fire chamber inserts. It kept leaking when I had the inserts in so I took them out. (Before you try and claim it was the element board, it was leaking with the stock.) the pressure is about the same as the ion without the inserts... Decently low. It's got a smooth shot, just wanted to see if I could drop the dwell a little and do some tuning since the 7th element board is running stock settings.