ILL BE FAIR, SO YOU BE FAIR
OFFER UP!!!! THE WORST I CAN DO IS SAY NO
looking to do a straight trade for a higher end gun, ego, shocker, angel, emag etc. i dont have any cash on hand, so i cant add.
. my 'cocker is definitely cocker-porn. its sexy. i half minied it, enough to not need a new front block(best of both worlds) but had to cut the banjo bolt. ss internals, 44 ram, all polished aluminum, i can polish 'er up before i ship it if you want e2
board. I WILL NOT PART THE E2 BOARD. it does leak from the front block, other than that it does not leak. i think it will need to be full minied and a new banjo bolt... then... this thing will be a BEAST
the promaster has been a beast. i recently lubed it all, LPR included. havent been to the field, so it will need to be tuned. id do it if i had a field here. this gun shoots ropes!!
the barrel kit its self is on good condition, 9/10. has a pin-sized chip by one of the holes (in the picture) and minimal tip wear. the case has a crack across one of the pannels. the .691 is stainless steel.
this next picture is the barrel youll get with it if you dont get the freak kit.(yes, the gun will still have the drop)
the crack in the plastic
the chip in the barrel
wont come with the hopper or tank (the hpr is the one thats on the cocker, so you get one HPR)
a video as of last spring
Im looking at a total trade value of about 500 for the guns and barrel kit. show me what you got! looking for an 07/08 ego maybe, older Bob Long guns, Shocker, maybe an axe or mini, NO DYES!!NO IONS!!