Originally Posted by Hoov661
So no ones familiar with the dye hyper reg?
I have a Dye Hyper 2 inline reg that came w/ the Dye Ultralite pump cocker I just picked up. I've been able to chrono at good velocities with the reg set at about 300psi and at around 350psi, although, I was using different main spring and hammer type (std. vs. heavy hammers and springs) combinations at those reg pressure settings. Unfortunately, I currently forget what combos those were. While I haven't tried the Hyper 2 on my CCM, if CCM recommends to run their markers' regs at 300psi, in theory, the Dye Hyper 2 should work on CCM markers as it can run well at 300psi based off of my experience on the Ultralite. I would do a test, but I've already got my settings down good for a low to mid 290's fps on my 6.5, so I don't wanna mess with it before the tourney tomorrow.